WASHING MACHINE PRODUCTION LINE VERTICAL GLASS WASHING MACHINE
INSULATING GLASS MACHINE
double glazing glass machine
1. The frame of the whole machine adopts international pipelines,
and the thickness of the tube shell is above 3mm. In order to
eliminate the welding effect, we also need to age the stamped parts
to prevent deformation after use or assembly.
The error of the finished glass should be within 0.2mm within 1
square, and the whole piece of glass (2.5 * 3.5) should be within
0.5mm
2. In the cleaning part, the thickness of stainless steel is 3mm.
3. The brush is always broken due to water seepage. In order to
prevent the bearing at the bottom of the brush from breaking, we
use a very famous stainless steel bearing, which is the best brand
in China (Harbin Bearing).
4. We use Omron brand for component PLC and Schneider brand for low
voltage electrical appliances.
5. In order to locate the aluminum gasket, we adopted a new
structure that can adjust the depth of the glue, and also has a
data display function.
6. We can produce stepped glass and triple-layered glass. For
stepped glass, we use servo motors.
The upper and lower left and right glass are controlled by servo
motors.
7. The overall size can be controlled at 2580, with a large number
of foldable parts. This is convenient for packaging and
transportation, and because of its large volume, it reduces
transportation costs and costs. Both ocean and inland
transportation exist.
In the last part 8, we use the flip table to help customers process
large frame glass. For large glass, we should put it down for
transportation. The driving wheel of the turning table adopts a
balance weight, which reduces the transmission resistance of the
glass and prevents marks on the glass. glass.
9. All hydraulic station valves adopt Yuyan brand. (Best in China)
10. Pay attention to the entire connection between the
photoelectric (OTTO KNICKS) and the sensor switch (OMRON), and a
reliable protective cover.
The wiring is beautiful and generous, and the protection is
reasonable.
Main Parameter
| Washing speed | 10~15m/min |
| Max.working speed | 45m/min |
| Washing glass thickness | 3~15mm |
| Max.insulating glass thickness | 80mm |
| Conveyor height | 500mm |
| Min.glass size | 450×280 |
| Max.glass size | 2500×4000
|
| Max.glass size | 2500*3500mm(LJBZ2535)Gas fillier line :2500*3200mm |
| Min.glass size | 280*450mm |
| Glass thickness | 3-15mm |
| Insulating glass thickness | 40mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed: | 48m/min |
| Washing brushes | 3 pairs |
| Water supply: | Water consumption:0.5t/h conductivity:≤50μs/cm |
| Air supply | Flow: 0.8m/min |
| Air pressure | ≥0.8MPa |
| Total power | 3P380V 50HZ 34KW |
| Dimension | 23500*3500*3700mm |
