A234 WPB Automatic Seamless 11Kw Elbow Machine

A234 WPB Automatic Seamless And Erw Steel Hydraulic Mandrel Bending Cold Forming Machine

1. Product Description:

stainless steel elbow machine have be made by our company which is divided into : machine main body, up cylinder , side cylinder , machine mold.When the Cold Forming Elbow Making Machine is working , the up cylinder will go down and lock the pipe and then the side cylinder will go forwards . When the side cylinder reach the cold forming elbow machine sensor and the elbow is formed the mould will bu up and then the elbow will be out of the machine .

For the mandrel type Cold Bending Elbow Machine , the speed is faster than the ball passing type but for the less thickness pipe fitting , it needs to go through by the ball pushing type and if theButt Welded Pipe Fitting is not good shape or not good dimension from Mandrel Elbow Making Machine we will use the ball to pass again for sizing the elbows.

Cold Forming Elbow Machine is different from Hot Forming Mandrel Elbow Machine . For the Cold Pushing Elbow Machine, the machine molds have two parts one is outside die which contain upper die and down die . Another part of the mold is inside mandrel or inside ball .

I. Work content of the supplier

1. Design and manufacturing.

2. Installation.

3, debugging.

Second, the performance

1. Used for cold push molding of stainless steel elbow.

2. Rated working pressure of oil is 25Mpa.The experimental pressure of the oil cylinder is 31.5MPa

3, the main cylinder pressure 200T two, (cylinder inner diameter 320mm) effective stroke 1100mm.

4. Side cylinder pressure is 250T, (cylinder inner diameter is 360mm) effective stroke is 900mm.

5. Elbow forming range diameter 114-273.

6, motor power 30KW.

7, 90° reversal mandrel demoulding

8, the environmental conditions of cold push machine: ambient temperature 5-38 degrees, relative humidity ≤82%, input voltage of three-phase four-wire 380V (-12%-- +15%), frequency of 50Hz±2%.The working time can be 24 hours a day continuous work, the air is free from corrosive media, the equipment must be operated in the workshop, there is enough space.

9, using YB-N46 anti-wear hydraulic oil.

Three, cylinder standard

2. Machine technical detail:

3. Company information

Our company is manufacturer of pipe fitting machines.We have focused on fitting machine 10years.Hot forming elbow machine, cold forming elbow machine, long bend machine,cold forming tee machine, pipe expanding machine,marking machine,median frequency heating machine,reducer machine, cap machine, shot blasting machine, cutting machine, bevelling machine,hydraulic press, CNC lathe machine, drill machine, ring rolling machine.

4. Our services:

Prepare-sale service:1). Provide professional technical advisory services. 2). Provide inspection and reception at any time.

In-sale service:1). Provide technical information and technical parameters of the machine. 2). Responsible for machine installation and commissioning. 3). Answer customer questions and give customers effective advices.

After-sale service:1). Machine spares within one year free replacement and provide free technical services.

I. Work content of the supplier

1. Design and manufacturing.

2. Installation.

3, debugging.

Second, the performance

1. Used for cold push molding of stainless steel elbow.

2. Rated working pressure of oil is 25Mpa.The experimental pressure of the oil cylinder is 31.5MPa

3. Main cylinder pressure is 100T, (cylinder inner diameter is 250mm) effective stroke is 500mm.

4. Side cylinder pressure is 63T, (cylinder inner diameter is 180mm) effective stroke is 600mm.

5. Elbow forming range diameter 21-89.

6, motor power 11KW.

7, 90° reversal mandrel demoulding

8, the environmental conditions of cold push machine: ambient temperature 5-38 degrees, relative humidity ≤82%, input voltage of three-phase four-wire 380V (-12%-- +15%), frequency of 50Hz±2%.The working time can be 24 hours a day continuous work, the air is free from corrosive media, the equipment must be operated in the workshop, there is enough space.

9, using YB-N46 anti-wear hydraulic oil.

Three, cylinder standard

1. The manufacture of oil cylinder conforms to JB/T10205-2000 and JB/T15622-2005 standards.

2. The cylinder is 45# steel, the inner surface finish is Ra0.3, the piston rod is 45# seamless tube, the surface is chrome plated, polished after plating, no straight lines, spiral lines, finish is Ra0.4.

3. The other parts of the cylinder are made of 45# forgings to ensure mechanical properties.

4. The piston guide sleeve of the main cylinder adopts copper sleeve, all seals adopt standard priority series, and the main oil seal is imported from Austria ACO.

5. Before the assembly of the cylinder, the smoothness, hardness, matching size and other items of the cylinder and piston rod shall be inspected, and the quality of the forgings and seals shall be inspected. The parts used in the assembly of the cylinder shall meet the standards, and the pressure test shall be carried out after the assembly of the cylinder.

5. Contact:

Darcy Dong

Email address: guozhong_darcy@pipefittingsmachine.com

Whatsapp/ Wechat: 008625630731167

Our company produce and export all kinds of carbon steel pipe fittings, Our city Cang Zhou city is the hometown of carbon steel pipe fittings. We have exported to many countries, such as, Russia, Egypt Malaysia, India, Turkey, Indonesia, Jordan etc.

Now every month, we export more than 50 containers' pipe fittings. According to client's requirement, we supply different quality fittings. And you also help our clients inspect the goods, dispatch the goods,and do clearance documents. So clients don't need to come to China for inspection and dispatch.

Besides,Our company is a manufacturer of pipe fitting machines, such as, hot forming elbow machine, cold forming elbow machine, long bend machine, cold forming tee machine, pipe expanding machine, marking machine, median frequency heating machine, reducer machine, cap machine, shot blasting machine, cutting machine, bevelling machine, hydraulic press, CNC lathe machine, drill machine, ring rolling machine.

We have focused on fitting machines more than 10 years. And we have exported to many countries, like Russia, Egypt,Malaysia, India, Turkey, Indonesia, ect. We have overseas office in Mumbai, India. Our marketing person and technician stay in abroad for 7-8 months each year for after sale service. Machine guarantee is one year. If our clients machine has problem, our after sale service person will come and help you solve the problem as quickly as possible.

We have one 11 professional technicians' team in overseas office for installation and after sale service (Five of them are more than 10 years technical experience. Three of them are more than 20 years technical experience).

To ensure the quality and stability of the machine, we use the most advanced production and testing equipment, including CO2 lasers meter, CNC grinding machines, scanning mirror, AC variable voltage power emulator stable, focus system. And we use the a thermostat measuring room, three-dimensional measuring instrument, laser dynamometers, digital bridge, and state-of-the-art equipment to check the quality and performance of our industrial laser equipment in each production step to ensure our laser cutting machine, laser engraving machine, laser marking machines and other equipment quality and stable performance.

We provide customers with affordable, high-quality machine. In order to achieve the advantages of Asia, the full benefit in terms of quality and cost, procurement of key components from Germany and the United States, and the production and manufacturing in China. We have the best supply chain in China and parts manufacturers, and a solid record of quality and innovation, to prove that our 17-year performance of the machine.

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise.

We deliver goods on time and safely