Small Industrial Dehumidifier Best Choice For Small Warehouse
Industrial Air Dehumidifier Famous Compressor 24hour Operation
Product Description
1. Functions
1) New and unique design, nice appearance, suing high strength
1.0mm thick cold rolling steel plate
2) Microcomputer automatically control,LED digital display
3) Efficient automatic defrosting system,low temperature appliance
4) Have fault automatically judgment fuction
5) 1-24 hours timing function
6) 1-24 hours intelligent timed function
7) Special humidity 1%RH can be adjusted, humidity setting range
10~98%RH
8) Pipe continue drainage function
9) The bottom have universal wheel, in all direction, no dead
angle, free movement
2. Parameters
| Article No. | CF7.5SD |
| Article Name | Industrial Dehumidifier |
| Dehumidify Capacity | 7.5 L/HOUR |
| Applying Area(with three meters height) | 200~250M2 |
| Voltage | 380V/50Hz |
| Rated Input Power | 2200W |
| Maximum Power | 2700W |
| Air Circulation | 1200M3/H |
| G.W.(KG) | 128KG |
When selecting industrial dehumidifier, it is necessary to choose
the appropriate dehumidifier according to the required area of the
dehumidifier
site, to avoid the use of large dehumidifier in small space,
resulting in a waste of energy;Large space dehumidifier using small
dehumidifier,
affect the dehumidification efficiency, but also consume more power
In the process of transportation and placement of industrial
dehumidifier, there will inevitably be vibration, roll and other
actions, resulting
in the displacement of refrigerant in the compressor.If the machine
is turned on at this time, the compressor will not work normally,
the noise
will be large, and the dehumidification efficiency will be
relatively low.Therefore, it is necessary to stand the dehumidifier
for a period of
time, so that the refrigerant in the compressor can be reflux in
place before it is used.
After opening the dehumidifier, it should be kept in standby state
as far as possible, and do not open and close frequently, so as to
greatly
reduce the damage to the machine performance and not waste a lot of
electricity.After power failure, it is necessary to turn off the
power
immediately to prevent the sudden power call and the sudden impact
of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier
in a place with air circulation and flat ground, and put it next to
the
wall.In this way, the moist air is pumped into the dehumidifier as
soon as possible, and the dry air can be quickly circulated to all
corners of
the workshop to achieve better dehumidification effect.
