M25 1'' Inch Turbo Type Pulse Diaphragm Valve NBR Nitrile Membrane
¾" & 1" Turbo Diaphragm Repair Kit consisting of a single diaphragm
(M25) plus spring (TM0L10G)
| Fluids: | Non-lubricated filtered air. |
| Operating temperature: | Nitrile diaphragm -20°C; +80°C
Viton diaphragm -20°C; +200°C |
| Operating pressure: | Between 0.5 and 7.5 bar |
M25 or M25V Diaphragm Repair Kit is used in Turbo 3/4'' & 1'' FP20, FM20, FP25, FM25, DP20, DM20, DP25, DM25, EP20, EM20, EP25,
EM25, SQP20, SQM20, SQP25, SQM25, FDP20, FDM20, FDP25, FDM25 pulse jet valves. The M25 Diaphragm Repair Kit is the Nitrile Kit,
for use with standard temperature applications. The M25V Diaphragm
Repair Kit is the Viton Kit, for use with high temperature
applications.
1. Diaphragm has excellent oil resistance, high wear resistance,
good heat resistance, strong adhesion.
2. The size of the spring is consistent with that of the steel bowl
in the diaphragm.
3. The large diaphragm has 6 mounting holes and the small diaphragm
has 4 mounting holes.
4. The middle steel bowl is all made of stainless steel.
We produced series Turbo type diaphragm repair kits, it is nice
replacement for Turbo diaphragm.
Ordering code: M20, M25, M40, M50, M55, M75
YouTube video of M25 Diaphragm Repair Kit For 3/4'' & 1'' Turbo Pulse Valve:
Main dimension of M25 Turbo 3/4'' & 1'' Pulse Valve Diaphragm Kit:
Details display of Repair Kit Diaphragm M25 For 3/4'' &1'' Turbo Valve:
Available Models of Diaphragm Valve Repair Kits For Turbo Pulse Valves:
| | | |
| FP20, FM20, FP25, FM25, DP20, DM20, DP25, DM25, EP25, EM25, SQP20,
SQM20, SQP25, SQM25, FDP20, FDM20, FDP25, FDM25 | | |
| FP40, FM40, DP40, DM40, EP40, EM40 | | |
| SQP50, SQM50, SQP55, SQM55, SQP60, SQM60, SQP65, SQM65 | | |
| FP65, FM65, SQP75-IN, SQM75-IN, SQP100-IN, SQM100-IN | | |
Tips: EPDM, Viton all available. |
Tips: The related solenoid coils and armature assembly are all supplied.
Factory Production Pictures of Solenoid Valve Diaphragm Kits:
The diaphragm consists of one or more layers coated on both sides.
Diaphragms of different materials can be manufactured according to
the requirements of use. The working temperature and pressure range
of the diaphragm itself depends on the type of rubber, fabric and
structure. The diaphragm can work at -10~80℃, 0.4~0.8 MPa, and the
fluororubber and silicone rubber diaphragm can work at -80~232℃.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
