Model Is SR-YPS-1 Shipping Type By Sea Rendering Plant Crusher
Working principle
1. This series of roller crushers are mainly composed of rollers,
roller supporting bearings, pressing and adjusting devices, and
driving devices.
2. Adjustment of the discharging granularity: a wedge or gasket
adjustment device is installed between the two rollers, and the top
of the wedge device is equipped with an adjustment bolt. When the
adjustment bolt pulls the wedge up, the wedge pushes away the
movable roller. The fixed wheel, that is, the gap between the two
rollers becomes larger, and the discharging granularity becomes
larger. When the wedge is downward, the movable roller is under the
action of the compression spring and the gap between the two wheels
becomes smaller, and the discharging granularity becomes smaller.
The gasket device is by adding or subtracting gaskets The quantity
or thickness is used to adjust the size of the discharging
granularity. When the spacer is increased, the gap between the two
rollers becomes larger, and when the spacer is reduced, the gap
between the two rollers becomes smaller and the discharging
granularity becomes smaller.
3. The driving mechanism is driven by two motors through a V-belt
to drive the rollers on the sheaves, and rotate in relative
directions. When crushing materials, the materials pass through the
rollers from the feed port, and are crushed by rolling, and the
crushed products are discharged from under the chassis.
4. For safety, the transmission part should install the safety
cover by itself according to the actual situation.
| equipment name | rendering crusher |
| model number | SR-YPS-1 |
| package | container |
| material | carbon steel |
