Heavy duty conductor wire hydraulic crimper head 100T hydraulic
crimping tool
Application:
Connecting with ultra high pressure pump, it is used for pressing
of overhead steel-cored aluminium strand and intermediate
connecting pipe of steel strand and tension clamp of transmission
line above 110KV.
Features:
1. Using high strength alloy steel forging processing and exquisite
heat treatment to ensure the strength and service life of the
equipment.
2. It is suitable for crimping of over 110kV overhead strain sleeve
and continuous operation of underground cable.
3. The maximum tube sleeve size is 76mm, the crimping surface is
wide, and the number of crimping is small, which can reduce the
crimping deformation and control the elongation.
4. The double acting hydraulic cylinder can avoid the problem of
spring fatigue and slow reset, and can shorten the reset time of
piston and improve the working efficiency.
5. The movable mould can assist the operator to take out the mould
easily after crimping.
6. The rotary die cover can be opened and closed quickly, which
makes the operation and positioning easier.
7. Simple design, easy maintenance.
8. Equipped with quick connector, convenient for loading and
unloading.
9. It must be equipped with ultra-high pressure hydraulic pump. The
pump is not included in the factory. It can be selected according
to customers.
10. The factory does not include mold, specific mold specifications
and models, need to be matched according to customer needs.
Data Sheet
| Model | YQF-100 |
| Rated pressure | 70Mpa |
| Output | 100T |
| Piston stroke | 22mm |
| Crimping range | Maximum outer diameter of copper-aluminum tube sleeve | 76mm |
| Maximum outer diameter of steel tube sleeve | 36mm |
| Weight | 38kg |
Mold comparison table
