F-T8 Automatic Toilet Paper & Kitchen Towel Wrapping Machine
1. Machine Appearance
F-T8 roll wrapper is a new generation wrapper with highest
production speed on the market and at the same time around 40% less
energy consumption comparing to known conventional models which
declare same or similar speed.
It can pack up to 140 packs/min (speed is in correlation with
packaging configuration) and it has the possibility of packaging
five roll wide packs. We have added possibility of packing vertical
core rolls (optional).
2. General Description
This wrapper is easy to use, it is fully servo driven, controlled
by the most advanced motion controller SIMOTION D, origin Siemens
brand, which allows extremely reliable production process. It
reaches output production speed over 140 packs/minute. With a very
low cost of maintenance and with compact dimensions, this wrapper
is ideal for mid-range or large-range converting lines.
3. Key Advantages
• Continuous motion design
• Motorized adjustments with digital feedback and calculated
positions for fast initial pack setup
• Changeover wizard provides onscreen instructions during
changeover
• Compliant materials for wide operating window and variations to
incoming product
• Large format range
• Limited change parts
• Closed loop film tension control
• Potential film savings with small panels and thinner films
• Flexible layout options and motorized lap seal for left and right
film panels
• Fast response seal heater: Benefits include better pack quality,
energy and film savings, and faster ramp-up rates
• LED indicators for speed or warning
4. working principle
The rolls are coming by five channels conveyor; they are launched
in the number of lanes according to packaging configuration needed,
which is set by HMI, in the single layer or double layers into
in-feed section, where they are transported and stacked by group of
carbon bars mounted on trimming belts. Carbon bars convey the group
of rolls on the elevator, which leads them into the area of
folding. The foil positioning section brings the packaging film
directly above the rolls by transport belts. The folding process is
performed by universal side folders, as well bottom folder and
counter folder. Side folding is done by innovative air supported
mechanical folders. The overhead pack transport section
continuously moves the pack through section of side folding and
rotating bottom sealer and deliver pack to side sealing section.
All motions and functions are fully controlled by the 21
independent servo motors and 6 inverter motors.
5. Conveyor design
Four-channel motorized belt conveyor, about 4meters long,
controlled by inverter, for rolls accumulation.
The group includes series of photo-eyes sensors for controlling the
right position and the presence of rolls.
6. Main Technical Parameters
| Name | Technical Parameters |
| Production speed | 35-140 packs/min |
| Max mechanical speed | 160 packs/min |
| Infeed | 1-5 lanes |
| Layers | 1 or 2 layers design |
| Average format changeover time | 10-30 min |
| Roll diameter | 90-160(200)mm(3.5”-6.3”)(7.9”) |
| Roll length | 90-300(3.5”-11.8”) |
| Pack width | 100-650mm(3.9”-25.6”) |
| Pack length | 90-630mm(3.5”-24.8”) |
| Pack height | 90-270mm(300mm) (3.5”-10.6”)(11.8”) |
| Power supply | 380V 50HZ/60HZ |
| Air Consumption | ＜500 L/Min |
| Wrapping Material | PE,LDPE |
| PE thickness,LDPE | 25-50 microns |
| Real Power consumption | 32KW |
| Machine weight | About 8000kg |
welcome to contact us!
