15 CBM HOWO DUMP TRUCK WITH CRANE SUPPLIER
The boom truck crane is mainly composed of lifting, luffing,
turning, lifting arm and chassis. The development of automotive
cranes was facilitated by the development of hydraulic technology,
the electronics industry, high-strength steel and the automotive
industry.
Mechanical driving boom truck crane with long working time has been
replaced by hydraulic truck crane.
The hydraulic system of the hydraulic truck crane adopts hydraulic
pump, quantitative or variable motor to realize the lifting
slewing, luffing, telescopic boom and telescopic leg of the crane,
and can act alone or in combination.
The motor is protected from overheating and has a safety device to
prevent wrong operation.
Multi-gear pump is selected for the large-tonnage hydraulic truck
crane, and the acceleration of the above actions can be realized
when confluent.
The hydraulic system is equipped with automatic overload safety
valve, buffer valve and hydraulic lock, etc., in order to prevent
overload or stall in crane operation and the accident caused by
sudden rupture of tubing.
The crane is equipped with a range indicator and a height limiter
to prevent overload or overextension, and the drum and pulley are
equipped with a device to prevent rope job-hopping.
Specification
SINOTRUK HOWO 6X4 DUMP TRUCK WITH CRANE
RIGHT HAND DRIVE
Model: ZZ3257N3847A
Made Year: 2021, Brand new, produced according to order
Cabin: HW76, long cabin, with one sleeper, with air conditioner,
with high metal bumper, with safety belts
Engine: WD615.47, 371HP, Euro II, 4 stroke direct fuel injection,
mechanical type
Gearbox: HW19710, manual, 10 F & 2 R
PTO: HW50
Front axle: HF9, 9000kg, drum brake
Rear axle: HC16, 2x16000kg, drum brake, Ratio: 5.73
Suspension: reinforced leaf springs (Front 10 pieces, Rear 12
pieces)
Tires: 12R22.5, tubeless, 11 pieces (including one spare tire)
Fuel tank: 300L, with locking cap
Steering: RHD ZF brand, hydraulic operation with power assistance
Tipping Body: 4600*2300*1500mm, 15CBM, thickness of bottom plate
8mm, thickness of side plate 6mm, China front Lifting hydraulic
system, Q235B steel material for bottom and side plates, rectangle
bucket, mechanical rear lifting gate
Without ABS(standard for tipper truck)
With XCMG 5ton crane
Overall Measurements: 9200x2550x3500mm
Color: Yellow (option: Red, White, Blue)
