PN: 1.25G CWDM SFP 1270-1610nm 80KM
1.25G SFP Transceiver LC 100KM Duplex CWDM be Compatible with Cisco, HUAWEI……
CWDM-SFP1G-80
The CWDM-SFP1G-80 series single mode transceiver is small form
factor pluggable module for duplex optical data communications such
as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI.
It is with the SFP 20-pin connector to allow hot plug
capability.This module is designed for single mode fiber and
operates at a nominal wavelength of CWDM wavelength. There are
eighteen center wavelengths available from 1270nm to 1610nm, with
each step 20nm. The transmitter section uses a multiple quantum
well CWDM DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver section uses
an integrated InGaAs detector preamplifier (IDP) mounted in an
optical header and a limiting post-amplifier IC. The CWDM-SFP1G-80
series are designed to be compliant with SFF-8472.
Features
Data-rate of 1.25Gbps operation18-Wavelength CWDM DFB LD Transmitter from 1270nm to 1610nm, with
Step 20nmAverage Output Power:0~5dBmReceiver Sensitivity:-24dBmCompliant with SFP MSA and SFF-8472 with duplex LC receptacleCompatible with SONET OC-24-LR-1Compatible with RoHS+3.3V single power supply
Applications
Gigabit EthernetFiber ChannelSwitch to Switch interfaceSwitched backplane applicationsRouter/Server interface
Cisco Compatible List
| LPT-XFP10G-BXD-40 | 10GBASE-BXD XFP BiDi, Tx1330/Rx1270nm 40km LC DDM |
| LPT-QSFP40G-SR4 | 40GBASE-SR4 QSFP+, 850nm 150m MMF MTP/MPO DDM |
| LPT-QSFP40G-CSR4 | 40GBASE-CSR4 QSFP+, 850nm 400m MMF MTP/MPO DDM |
| LPT-QSFP40G-LR4 | 40GBASE-LR4 QSFP+, 1310nm 10km SMF LC DDM Duplex |
| LPT-QSFP40G-LR42 | 40GBASE-LR4 QSFP+, 1310nm 20km SMF LC DDM Duplex |
| LPT-QSFP40G-ER43 | 40GBASE-ER4 QSFP+, 1310nm 30km SMF LC DDM Duplex |
| LPT-QSFP40G-ER4 | 40GBASE-ER4 QSFP+, 1310nm 40km SMF LC DDM Duplex |
| LPT-SFP25G-SR85 | 25GBASE-SR SFP28, 850nm 100m MMF LC DDM Duplex |
| LPT-QSFP100G-SR4 | 100GBASE-SR4 QSFP28, 850nm 100m MMF MTP/MPO DDM |
| LPT-QSFP28-CWDM4 | 100GBASE-CWDM4 QSFP28, 1310nm 2km SMF LC DDM Duplex |
| LPT-QSFP100G-LR4 | 100GBASE-LR4 QSFP28, 1310nm 10KM SMF LC DDM Duplex |
| LPT-QSFP100G-ER4 | 100GBASE-LR4 QSFP28, 1310nm LWDM 25KM SMF LC DDM Duplex |
| LPT-QSFP100G-ER4L | 100GBASE-ER4L-S QSFP28, 1310nm 40km SMF LC DDM Duplex |
Description
LINKOPTO1290nm DFB 1.25Gbps SFP transceiver is designed to transmit and receive
optical data over single mode optical fiber for link length 10km.
LINKOPTO SFP 1290nm module electrical interface is compliant to SFI
electrical specifications. The transmitter input and receiver
output impedance is 100 Ohms differential. Data lines are
internally AC coupled.
LINKOPTOk module provides differential termination and reduce differential
to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of
improved FR4 material or up to about 150mmof standard FR4 with one connector.
FAQ
1. Do you have any MOQ?
Ans : No, we did not set any MOQ unless for Special promotion item.
2. How can I pay you?
Ans : We accept Bank Wire Transfer, Paypal ( for <$5000 payment
)
Please contact us for our Paypay account.
3. What is your warranty?
Ans : We offer basic 3 years warranty for all products.
4. Can I use your Transceiver module on Cisco or Alcatel-Lucent
equipment?
Ans : Yes, we can offer Transceiver modules compatible on Cisco,
Alcatel-Lucent, HP, Extreme…etc
5. How about your lead-time?
Ans : For normal order, we can deliver in 1~2 weeks, for Hot
selling products, we can deliver within 3 days.
Quality Control
LINKOPTO Package
