Materials of scrap metal baler
Materials: iron / steel: scrap iron, light and thin materials,
scrap, car shell, scrap, waste oil bucket, bicycle frame, lathe
chips, shavings, iron chips, steel chips, color steel tiles,
stainless steel.
Scrap aluminum: aluminum chips, aluminum shavings, aluminum
profiles, doors and windows, cans, aluminum foil, aluminum alloy.
Scrap copper: copper wire, copper plate, copper scrap, copper
shavings, copper wire
Features of scrap metal baler
1. It adopts the structure of rotating cover. The opening area of material box is large, especially
suitable for large, empty and lightweight materials.
2. Hydraulic drive is used in this machine, having reasonable design,
compact structure and reliable sealing performance.
3. Super bin design with large one-time feeding and high working
efficiency.
4. Stable movement, low consumption of motive power, strong
adaptability and visibility of operating.
B. Overall structure
Structure of scrap metal baler
This machine is composed of frame, hydraulic system and electric
system.
1. Main machine is composed of frame, door cover and cover
cylinder, main cylinder and main pressure head, side cylinder and
side pressure head, bale turning cylinder and bale turning machine
etc.
1) Frame is composed of base, right and left wall plates, cover
plate, main cylinder bracket, side cylinder frame etc. Compressed
bin is composed of base, right and left wall plates, door cover,
main pressure head, side pressure head and panel turnover etc.,
each part (except panel turnover) is installed with abrasion
resistant lining board through carburizing and quenching.
2) Door cover and cover cylinder. Door cover should be hinge
jointed with spindle sleeve on right and left wall plates, cover
cylinder should also be hinge jointed with beam support by pin,
slipper of door cover (tapered end should be installed at front
end) should be connected with piston rod head of cover cylinder,
under movement of cover cylinder, close and open of door cover are
finished, at this time, it takes effect of tight locking and loose
locking.
2. Hydraulic system is composed of motor pump station, valve
station, oil tank and pipeline etc.
3. Electric system is mainly composed of motor start circuit etc.
