PLF Female Elbow Push In Pneumatic Hose Fittings 1/8'' 1/4'' 3/8'' 1/2''
BRANDO's Pneumatic Hose Fittings provide easy connection and disconnection tube without causing damage to the tube. BRANDO's Pneumatic Fittings are available in a variety of types, moulds, sizes and thread types to satisfy various metric and inch tube demands. BRANDO's Pneumatic Fittings could accommodate both metric size tubing and inch size tubing that are made from polyurethane, polyethylene and nylon.
BRANDO's Pneumatic Hose Fittings Features:
1. Optional shapes of release sleeve: As a manufacturer, BRANDO can provide Oval and Round Release Sleeve.
2. Multiple colors of release sleeve: Blue, Black, Orange, Red, Gray
3. Accommodate kinds of connection thread type: R (PT, BSPT), G (BSPP), NPT, UNF, UNC, Metric.
4. Accommodate metric size tubing OD: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm.
5. Accommodate inch size tubing OD: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8".
Technical data of Pneumatic Hose Fittings:
| Material | |
| Threaded Connection | |
| |
| |
| |
| Working Pressure | |
| Connecting Tube | |
| |
| Connecting Diameter Tube | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm (Outer Diameter) |
| Medium | |
| Working Temperature | |
Specifications of PLF Female Elbow Pneumatic Hose Fittings:
List of All Push To Connect Pneumatic Hose Fittings:
Choosing the Right Fittings for Your Pneumatic System:
Fittings help control the force and directional flow of compressed gas or air used in pneumatic systems. One of the first considerations in choosing a connector is the type of vessel that you will be connecting to such as the flexibility of the hose or tube, as well as the inner diameter (ID) and outer diameter (OD) of the vessel to ensure an adequate seal and secure connection. Fitting material choice for your pneumatic connector is also important, including gas compatibility or resistance to heat or corrosion.
Other considerations in choosing the right pneumatic system connector include:
1. Type of connection and the function it performs
2. Operational pressure of the pneumatic system
3. Operating temperature range
4. P.S.I. requirements for your application
5. Amount of vibration produced by the pneumatic system
6. Thread type of the receiving fitting
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
