245-550 Mpa 141 Mm Material Width 7.5 Kw Light Gauge Steel Framing
Machine
Main Specifications
| No. | Item | Specification |
| 1 | Powered Decoiler |
| Loading weight | 2 tons |
| Coil Inner Diameter | 460-520mm |
| Power | 1.5kw |
| 2 | Roll Forming Machine |
| Dimension | 5Mx1Mx1.8M |
| Weight | 3500KGS |
| Material of Rollers | Material: GCr15 |
| Processing Technic for Rollers | CNC machining, heat treatment HRC58-60,then processed by CNC lathe,
plating finally |
| Material of Shafts | 40Cr |
| Processing Technic for Shafts | CNC machining, quenching and tempering HRC28-32,then processed by
CNC lathe, plating and polishing finally |
| Sheet Guiding Device | |
Holes Punching Device
| (dimpling with screw holes,service hole,web notch,lip notch, truss
end chamfer, swage, crimp)
|
| 3 | Control System |
| Main control system | One Lenovo laptop and a control box inside of based frames of the
machine |
| Producing software | Special designed to match with the designing software Vertex |
| Leaser Printing Device | USA Matthews Leaser Printing Device for painting spray logo and
installation indicating number |
| Remote-control device | Wireless remote-controller controls machine to go forward or
backward or stop |
| Brands of main components | PLC(self-developed),Relay (Schneider), proximity switch(Schneider),
Encoder(Omron), Servo Motor(Xinjie) |
| 4 | Servo System and Hydraulic System |
| Servo motor | 5.5kw, taking with precision planetary gear reducer |
| Hydraulic Station | 7.5KW;Hydraulic oil injection 200 litre |
| 5 | Run-out Table |
| Length | 3M |
VERTEX BD house design software
1. The wall, floor and roof structure is produced automatically,
saving design time.
2. Automatic 3D molding, insure 100% accuracy.
3. With analysis project function, the software can calculate
bearing capacity.
4. Create frame work 3D map and 3D decoration view.
5. The whole building frame can be resolve to independent unit
drawing.
6. Calculate the bill of material, including the needed steel,
plates, thermal insulation material,doors and windows, screws and
other matching material.
7. Create the processed data including the marked work piece,
docking with the equipment.
8. Software maintenance and training fee.
9. Maintenance and supporting fee is USD 2200.00/Year. It’s for
software update and optional.
Equipment description
1: Configuration of the machine
Uncoiler 1 set
Roll forming roller: 12 groups
PLC control system 1 set
Hydraulic cutting system: 1 set
Collection table
2: Working Process Flow of the omega profile forming machine
Uncoiling-Coil feeding-Guiding-Roll Forming-Punching (if needed) -
Cutting-Collection table
3: Technical Parameters:
A: Power supply:
380V, 3 phases, 50 Hz (can be adjusted according to actual power
supply conditions in different countries)
Main motor power: 7.5KW
Pump power: 5.5kw
B:Uncoiler:
Inner diameter: 460-520mm
Outer diameter: 1300mm
loading weight: 2T
C:Forming part:
Feeding thickness: 0.6-1.2mm
Feeding width: 50-500mm
Forming speed: 8-12m/min
Cutting Deviation: 10m±2mm
No. of Roller station: 12 groups
Roller material: GCr15
Material of shaft: Cr40
Diameter of shaft: 42mm
D:Hydraulic System:
Hydraulic pressure: 10-12 Mpa
Cutter material: SKD11
E:Control system:
Full-automatic NC-PLC control system
Control channel: Colored touch screen
Our machine photo
