HCPL-4506-500E Intelligent Power Module and Gate Drive Interface Optocouplers SOP8
Description
The HCPL-4506 and HCPL-0466 contain a GaAsP LED while
the HCPL-J456 and the HCNW4506 contain an AlGaAs LED.
The LED is optically coupled to an integrated high gain photo
detector.
Minimized propagation delay difference between devices makes these
optocouplers excellent solutions
for improving inverter efficiency through reduced switching dead
time.
An on chip 20 kΩ output pull-up resistor can be enabled by shorting
output pins 6 and 7,
thus eliminating the need for an external pull-up resistor in
common IPM applications.
Specifications and performance plots are given for typical IPM
applications.
Features
• Performance specified for bommon IPM applications
over industrial temperature range: -40°C to 100°C
• Fast maximum propagation delays
tPHL = 480ns
tPLH = 550ns
• Minimized Pulse Width Distortion
PWD = 450 ns
• 15 kV/µs minimum common mode transient immunity at VCM = 1500 V
• CTR > 44% at IF = 10mA
• Safety approval: UL Recognized
-3750 V rms / 1 min. for HCPL-4506/0466/J456
-5000 V rms / 1 min. for HCPL-4506 Option 020 and HCNW4506 CSA
Approved
IEC/EN/DIN EN 60747-5-2 Approved
-VIORM = 560 Vpeak for HCPL-0466 Option 060
-VIORM = 630 Vpeak for HCPL-4506 Option 060
-VIORM = 891 Vpeak for HCPL-J456
-VIORM = 1414 Vpeak for HCNW4506
Applications
• IPM isolation
• Isolated IGBT/MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN
