50ft Movable Fast Extending Telescopic Mast Easy up Lightweight
Telescoping Mast Pole
Specifications of telescoping lift mast
Closed length: 1.95m (Bottom base included)
Extended length: 10m (Bottom base included)
Wind load: working rate:25m/s Max rate:35m/s
Temperature: working temp:-40--+50C
Storage Temp:-55--+70C
Color: the whole unit will be in army green when closed, but when
extended, the main pole will be in origin color of aluminum alloy
only with top 4cm of each pole section in army green color.
Technology: painting
Material: Main Pole: aluminum alloy
Bottom base and accessories(except the stakes): iron steel
Pulling cord: stainless steel wire(OD:2mm)
product introduction:
Telescoping mast is a mast comprised of sections which collapse
into each other.
Our best-selling mast pole is made of the highest quality aluminum
and built to last.
Extremely portable but ready to provide years of permanent service
too!
In telecommunications, a mast is used to boost the signal. It's
movable with transportation wheels.
In extensions from 3m to 15m.
specification:
1)Hand winch –with bottom square tube
| extended height (m) | No. Of section | Retracted height(m) | Outer tube range(mm) | Self weight (kg) | Max.payload (kg) |
| 3 | 2 | 1.6 | T50-T60 square | 3 | 50 |
| 4 | 3 | 1.4 | 50-60 -T70 | 4 | 40 |
| 5 | 3 | 1.77 | 50-60- T70 | 5 | 40 |
| 6 | 4 | 1.6 | 50-70 -T80 | 6.5 | 30 |
| 7 | 4 | 1.85 | 50-70- T80 | 7 | 30 |
| 8 | 5 | 1.7 | 40-70-T80 | 9 | 20 |
| 9 | 5 | 1.9 | 40-70- T80 | 10 | 20 |
| 10 | 6 | 1.75 | 40-80-T100 | 12 | 15 |
| 12 | 7 | 1.8 | 40-90-T100 | 28 | 10 |
| 15 | 8 | 1.95 | 40-100-T120 | | 10 |
Note: bottom square tube show as T-70, means: 70*70mm square tube
2)Hand push up
| extended height (m) | No. Of section | Retracted height(m) | Outer tube range(mm) | Self weight (kg) | Max.payload (kg) |
| 3 | 2 | 1.55 | 50-55 | 3 | 20 |
| 4 | 3 | 1.35 | 50-60 | 4 | 20 |
| 5 | 3 | 1.7 | 50-60 | 5 | 20 |
| 6 | 4 | 1.55 | 45-60 | 6.5 | 15 |
| 7 | 4 | 1.8 | 45-60 | 7 | 15 |
| 8 | 5 | 1.65 | 45-65 | 9 | 12 |
| 9 | 5 | 1.85 | 45-65 | 10 | 12 |
| 10 | 6 | 1.7 | 40-65 | 12 | 10 |
| 12 | 7 | 1.75 | 35-65 | 28 | 8 |
| 15 | 8 | 1.9 | 30-65 | | 6 |
Product photo:
Accessories:
Usually these masts require a flat or socket wrench, with the quick
release clamps you can raise and lower the masts without any tools.
Even with limited space these quick clamps can be easily used,
because the lever can be adjusted at any position. Just pull out
and release the lever, the strong spring latches the lever at the
desired position.
Packing, delivery tiem, and shipping:
We will close then pack the goods safely in solid wooden box.
Prodcution lead time for sample: 2 weeks; 4 weeks for bulk order
Ship by sea, air, or express according to your request.
Q&A
Q: How much weight will this mast support?How much weight will this
mast support?
A: It will depend entirely on what you mount on it, how it is
mounted at the base, if guys are used and how you plan to extend
the mast with the load attached
Q: Is guying necessary?
A: When securely mounted at the base and with most lightweight
items attached, guying is not usually necessary. However, guying is
always recommended.
Q: What's the surface treatment of the mast?
A: You can choose painting or eletroplated.
Q: What color do you have for the painting?
A: We have common color such as black, yellow, green, blue, red.
Also we can tailor-made for your special request.
Q: What's the difference between push up mast and winch up mast?
A: Hand push up is used the clamps to lock each section, while
winch up mast uses the winch device to elevate the mast.
