AIC-IP143 Petroleum Asphaltenes Analysis Instrument
Introduction:
This Asphaltenes Analysis Instrument is a new type of
multifunctional product, which can be used for analyzing four
components of heavy oil, four components of petroleum asphalt,
saturated hydrocarbons and aromatics of petroleum fractions
(chromatographic separation method), wax content in crude oil, gum
in crude oil, asphaltenes in crude oil.
This Aspahlt Test instrument is divided into three parts: AIC-IP143
Automatic Four-component Tester (main unit), IP143B Automatic
Sample Loading and Cleaning Tester of Adsorption Column (Auxiliary
machine 1), IP143A Automatic Solvent Evaporation Recovery Tester (
Auxiliary machine 2).
The design idea of this instrument embodies the concept of
automation and environmental protection, which isolates the
operator from the toxic solvent to the greatest extent and recovers
the toxic solvent when it evaporates, which not only protects the
operator but also reduces the pollution of the toxic solvent to the
environment.
The following is the introduction of main unit AIC-IP143.
This asphaltenes analysis instrument uses an air bath, no external
water bath is required. The rinsing sequence, volume, rate and
other parameters of the solvent can be set according to needs, and
the bottle can be automatically replaced.
Features:
1. Applicable standards: NB SH/T 0509 "Determination of Four
Components of Petroleum Asphalt", SY/T 0537 "Determination of Wax
Content in Crude Oil", SY/T 7550 "Determination of Wax Colloidal
Asphaltene Content in Crude Oil", JTG E20-T 0618 "Asphalt Chemical
Composition Test (Four-Component Method)", SH/T 0266 "Petroleum
Asphaltene Content Determination Method", and RIPP10-90
"Petrochemical Analysis Method" on the determination of four
components of heavy oil ,Wait.
2. All Chinese /English interface, the rinsing process is fully
automatic.
3. Multiple rinsing programs can be set, and the sequence, volume,
rate and other parameters of each solvent rinsing can be set
according to the needs. The corresponding rinsing program is
selected for each rinsing, and the instrument automatically works
according to the set parameters.
4. Four solvents can be used to rinse the sample. After each
solvent is rinsed, the receiving bottle will be replaced
automatically, and the user can also choose several of them for
rinsing according to their needs.
5. A peristaltic pump is used to precisely control the flow rate
and volume of the solvent. Each leaching system is equipped with a
peristaltic pump to correct the speed .
6. The temperature in the oven can be set by the user as required,
and the PID will automatically control the temperature.
7. Imported solvent resistant solenoid valve is adopted, and the
pipeline adopts imported fluororesin tube.
8. The stainless steel mirror panel is used in the column box to
prevent corrosion, and the glass adsorption column is simple and
convenient to install.
9. The internal use of a sample-changing six-way valve can prevent
each solvent from being mixed during rinsing.
Specifications:
| Applicable standard | ASTM D6560,IP 143 |
| Quantity of adsorption columns | 4 |
| Temperature control range | 50±1℃ |
| Flow rate of rinsing solvent | 1mL～15mL arbitrarily set |
| Heating power | 1000W |
| Control method | Laptop |
| Power supply | AC (220±10%) V, (50±1) Hz |
| Total power | 2000W |
| Dimension | 600×700×1430 (mm, length×width×height) |
| Weight | 50KG |
AIC-IP143M Manual Model Petroleum Asphaltenes Analysis Instrument
