alligator shear
Waste scrap sheet shearsQ43 series crocodile hydraulic steel
shearing machinealligator scrap metal cutting machine.
Technical data
| Model | Max.cutting force(ton) | Blade length (mm) | Max.cutting size(mm) | Shearing frequency (times/min) | Motor (kw) |
| Q43-63/600 | 63 | 600 | 30x30 φ35 | 8-12 | 7.5 |
| Q43-63/800 | 63 | 800 | 30x30 φ35 | 8-12 | 7.5 |
| Q43-100/600 | 100 | 600 | 35x35 φ40 | 8-12 | 11 |
| Q43-100/800 | 100 | 800 | 35x35 φ40 | 8-12 | 11 |
| Q43-120/600 | 120 | 600 | 45x45 φ50 | 8-12 | 15 |
| Q43-120/800 | 120 | 800 | 45x45 φ50 | 6-10 | 15 |
| Q43-160/800 | 160 | 800 | 55x55 φ55 | 6-10 | 18.5 |
| Q43-200/800 | 200 | 800 | 55x55 φ63 | 6-10 | 22 |
| Q43-200/1000 | 200 | 1000 | 55x55 φ63 | 6-10 | 22 |
| Q43-250/1000 | 250 | 1000 | 63x63 φ70 | 6-8 | 2x15 |
| Q43-250/1200 | 250 | 1200 | 63x63 φ70 | 6-8 | 2x15 |
| Q43-315/1000 | 315 | 1000 | 70x70 φ80 | 6-8 | 2x18.5 |
| Q43-315/1200 | 315 | 1200 | 70x70 φ80 | 6-8 | 2x18.5 |
| Q43-400/1200 | 400 | 1200 | 80x80 φ90 | 5-6 | 2x22 |
| Q43-400/1500 | 400 | 1500 | 80x80 φ90 | 5-6 | 2x22 |
| Q43-500/1200 | 500 | 1200 | 90x90 φ100 | 4-6 | 2x22 |
| Q43-500/1600 | 500 | 1600 | 90x90 φ100 | 4-6 | 2x22 |
Safety operation rules:
1. crocodile scrap metal shearing machine should be operated by the
designated persons. Others can not be used arbitrarily without
training.
2. before driving, check whether the parts are normal and whether
the fasteners are solid.
3. steel, cast iron, soft metal parts, too thin pieces, work pieces
of less than 100 millimeters in length, and work pieces that exceed
the length of scissors are prohibited from shearing.
4. when operating, the body is not allowed to approach the
transmission part and knife edge of the equipment, and the safety
of the surrounding personnel should be paid attention to, so as to
prevent the material from rising and hurting people. When cutting,
the material should be cut near the edge of the knife as far as
possible.
5.When cutting short material, hand-held work piece is prohibited.
The clamp should be used.
6. when the scrap metal shearing machine operate, the operator
shall not leave the post without authorization. When the work is
completed or the post is temporarily left, the power supply should
be cut off. At the same time, the machine should not be repaired or
touched by hand, and the hand or foot is strictly prohibited to
press the material in the material box.
7. the lubricating parts of crocodile scrap metal shearing machine
should be lubricated at least once per shift according to the
requirements.
