20dBm 3G Mobile Phone Signal Booster 3G Repeater Signal Amplifier
Descriptions:
20dBm Indoor network signal boosters is a series of GSM, CDMA, DCS,
PCS, 3G and 4G mobile phone boosters. Today I will
introduce this 3G WCDMA 2100mhz mobile signal repeater, it boost 3G
2100mhz signals, when you get a very weak signal for your 3G
mobile or network, you can install this cellphone signal booster,
it can solve your problem. When you install this indoor signal
booster,
you need connect with a outdoor antenna and indoor antenna with
cables, it is very easy to operate. Welcome to contact with us for
more details.
This mobile signal booster can cover 300~500 square meters. It is
with DIP switch, gain can be adjustable. This pico repeater is
widely
popular in Europe, South America, Lartin America and Middle East,
South Africa and etc.
Features:
Cost effective solution for weak signal zones, reduce drop/off calls.
Compact size, low power consumption, easy installation, great
cover.
Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source
Cover about 500~3000 m² without block or obstruct.
High linear design, ALC function design, low interference to BTS.
Support any cellular devices (voice & data & video)
Wide band signal booster, or customize selective band booster.
Antenna isolation testing,Prevent the oscillation
Support system CDMA450, LTE700, LTE800, iDEN, CDMA800/GSM850,
GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA, LTE2600,etc
Applications:
To expand signal coverage of fill signal blind area where signal is
weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking
Lots, etc.
Specifications:
| Frequency Range | Uplink | Downlink |
| LTE 2600 | 1920- 1980MHz | 2110- 2170MHz |
| Max. Gain | 60 - 70dB | 65 - 75dB |
| Max. Output Power | 15dBm | 20dBm |
| Band width | Wide Band |
| Manual Gain Control | 31dB / 1dB Step |
| Automatic Gain Control | >20dB |
| Ripple in-band | ≤ 6dB |
| Return loss | ≤ -10dB |
| Noise Figure | ≤ 6dB |
Spurious Emission
&Intermodulation | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
| WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) |
| Modulation Accuracy | ≤ 12.5% |
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 |
| Time Delay | ≤ 1.5 μs |
| Frequency stability | ≤ 0.01ppm |
| MTBF | > 50000 hours |
| Power Supply | AC100-240V,DC9V/3A |
| Power LED | Power indicator |
| ISO LED | Red | Autoexcitation or High Power |
| Green | Standard |
| AGC LED | Off | Low Power or No power |
| Green | Standard |
| Red | Full Signal, ALC On |
| Mechanical Specification |
| RF Connector | N-Female |
| Impedance | 50 ohm |
| Humidity | < 90% |
| Operating Temperature | -10°C~55°C |
| Environment Conditions | IP40 |
| Size | 204mm×128mm×27mm |
| Weight | 1.5 Kg |
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Standard Package:
1) AC90-264V, DC9V/3A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
