Type D - Single Lip Wiper Shaft Seals

Type D - Single Lip Wiper Shaft Seals

Type D - Single Lip Wiper is a single-acting elastomeric dirt wiper with bearing segments. Main and secondary seals, as well as the guidance of modern sealing systems, require reliable protection of the wiper. Dirt, dust, and moisture must not contaminate the working medium and, most importantly, must be kept away from the pressure seal edges. Depending on the appliC-A-Tion, a simple wiper with or without metal reinforcement and a double wiper with or without pressure relief can be used. DAI wipe seals can be used with mineral oil and many other types of hydraulic fluids.

Some OEM No. For Your Reference:

Characteristics:

1. Good seating at the outer diameter.

2. Very good wiping action.

3. Wiper can be used for a wide.

4. Temperature range.

5. No twisting in the housing and no pressure build-up between seal and wiper.

Sealing rings Storage

Sealing rings should be stored in dry, dust-free rooms – relative humidity max. 65%, moderate ventilation, free from draughts. Observe the storage room requirements in accordance with DIN 7 716.

Sealing rings should be stored at an air temperature of +20 °C 5 °C free from stress, i.e. without tension, compression or deformation. Do not allow the rings to come into contact with chemicals such as acids, solvents or fuels.

Protect sealing rings from:

■ direct sunlight

■ UV light

■ ozone (e.g. produced by electrical equipment)

■ intense thermal radiation.

Caution! If these conditions are not maintained, this may cause unfavourable changes in the physical characteristics of the sealing rings (e.g. hardening). Do not remove sealing rings from their original packaging until immediately before fitting.

The maximum storage time from manufacture to fitting is:

■ 5 years for NBR

■ 10 years for FPM/HNBR.

Cleaning Caution!

Solvents must not be used for cleaning. Observe the guidelines on the cleaning of rubber products according to DIN 7 716. Sealing rings G and GR can be cleaned using a glycerine/ spirit mixture (1:10 ratio).

Sealing rings SD can be cleaned using a warm soap solution. Heavily contaminated or greased sealing rings should be cleaned first with a soft cloth – sharp-edged objects must not be used.

After cleaning, sealing rings should be allowed to dry at room temperature – max. +40 °C.

Special designs Available by agreement:

■ sealing rings G and GR for temperatures from –20 °C to +160 °C or circumferential speeds up to 16 m/s and 12 m/s respectively; pay attention to compatibility with media

■ materials based on fluoro rubber, suffix FPM, HNBR.

   Guangzhou Suncar Seals Co., Ltd. Is A Foreign Trade Company Specializing In The Wholesale And Retail Of Engineering

Machinery Seals, And Its Current Business Covers Many Regions At Home and Abroad. Over the years, We Have Focused on the Innovative

Research and Development of Manufacturing Processes, and Have highly Automated Production and Processing Base, Providing High-quality

Seals and Full Vehicle Accessories Kit for Excavators,Dozers ,Wheel and Other Equipment, Solving Engineering Machinery Maintenance

Problems. 

    As A Leading Brand In The Export Trade Of Domestic Construction Machinery Seals, Suncar Not Only Has Advanced Manufacturing And

Processing Capabilities, But Also Has a Scientific Management System And a Complete After-sales System. The Business Area Has A

Management Center, Product Consulting, Logistics Distribution, Financial Management,Product AlloC-A-Tion And Other Services.

We Can Offer You Most of the Oil Seals for the Construction Machines like Excavators, Dozers, Backhoe Loaders, Wheel Loaders and etc.

Our Company Specialist In Spare Parts For Excavator Such Brand As:

Our Product As Follow:

Oil Seals

Our Different Type of Oil Seals

* Single Lip Oil Seal * double Lip Oil Seal * Shaft Oil Seal *

Our Different Types of Oil Seals

* SC Oil Seal * SB * TC * TB  * TCK * VC  VB*  KC * MKB * TCZ *  TCV *  TCN *  TC4 *  TB4 

* TCJ *  KA3J *  DC *  DB *  MG *  WT * WTT *  OKC3 *  MOX *  MOD 

Oil Seal -- TC TB TCV TCN DB DC DCY TC4Y ETC.

Piston Seal:

SPGW *  SPGW2 *  SPGWV *  SPGO *  SPGA *  OK *  NCF *  KDAS/DAS/TPM/ZW *  OUY

SPG * SPGM *  SPGN *  SPGC * OHM *  CPI * CPH * ODI * OSI *  OUIS *  OUHR * OKH *

Rod Seal:

IDI *  ISI * IUIS * IUH * UNI * PTB(SKF) * H605(HALLITE) * PTU *  SPNO

SPN * SPNS * SPNC * U-CUP *  TSE

Piston and rod seal:

UPI * USI * UPH * USH * V99F * V96H * UN * UHS * UNS

Back Up Ring :

BRT-PTFE * BRT-NYLON * BRT2 * BRT3 * BRT-G * BRT-P * BRN2 * BRN3

O Ring :

O-ring P series ; O-ring G series; O-ring AS series ; O-ring S series;

O-ring M 1.5 series; O-ring M 2.0 series; O-ring M 1.9series; O-ring M 2.4 series;

O-ring M 3.0 series; O-ring M4.0 series

D Ring : DRP , DRI

Dust Seal:

DKI * DWI * DWIR * DKBI * DKBI3 * DKBZ * DKH * HBTY * URE * 

LPI * A1 * GHP * PPY * DLI * DLI2 * VAY *

DKB * GA * DSI * LBI * LBH * LBHK * DSPB * DHS * FA * HBY * HBTS *

Type A - Single Lip Wiper * Type B - Double Lip Wiper

Different AppliC-A-Tions of Oil Seal Kits

* Arm Oil Seal * Boom Oil Seal * Bucket Oil Seal * Dipper Oil Seal * Track Adjuster Oil Seal * Main pump Oil Seal * O Ring Oil Seal *

Back Lift Oil Seal * Lift Oil Seal * Steering Oil Seal * Loader Oil Seal * Excavator Oil Seal * 

Break Oil Seal * Blade Oil Seal * Dump Oil Seal * Swing Oil Seal * Shaft Oil Seal *

HUB Oil Seal * gear box Oil Seal * etc

We provide wide range of replacement Oil seal repair kits consist of different sizes, type used by OEMs i.e. C-A-Terpillar Oil Seal * Komatsu Oil

Seal * Hitachi Oil Seal * JCB Oil Seal * Poclain Oil Seal *  and various other branded machines for the machines like

Loader Oil Seal * Excavator Oil Seal * Dozer Oil Seal Hub Oil Seal * Motor Oil Seal * Pump Oil Seal * Dumper Oil Seal *

Crane Oil Seal * Motor Grader Oil Seal and other machines Oil Seal used in Mines, Cement Industries, Coal Industries, Steel Industries,Sugar

industries & Oil Industries etc.