Auto Blade Fuse / Plug-In Type Fuse Component Level Temperature
Range -40˚C To +105˚C
Competitive Advantage
1. Factory supply directly
2. Completed certificates such as UL,VDE,SGS,etc and high quality
available
3. Quick delivery
4. Best after-sales services
5. OEM & ODM available
Other specification
| Fast Acting, Low Voltage For UP To 32v DC |
| Material | *Body: Plastic.
*Metal: Zinc Alloy with Tin Plating. |
| Standard | According To SAE J1284 |
| Circuit Protection To Replace Fusible Wire OR Fusible Link. |
| Fuses Are Color-Coded For Easy Amperage Identification.Listed by UL
Certificated |
Special Requirements for Automotive Fuses
(1) Vibrations
Automobiles are exposed to vibrations under a wide range of
conditions including when driving continuously on highways, when
driving on poor or cobbled roads, or when idling. Automotive fuses
must be able to withstand a vibration acceleration of 44.1m/s2 for
automobiles and 196m/s2 for motorcycles, and guarantee performance
even when exposed to sympathetic vibration from frequency changes.
(2) Ambient Temperature
Automobiles are expected to deliver problem-free driving
performance both in the scorching heat of desert environments and
in areas subjected to extreme cold. Moreover, because fuses are
installed in the engine compartment and the passenger compartment,
they are required to function within a broad temperature range of
-40-120°C.
(3) Precision
Automobiles vary widely in weight depending on their fuel
efficiency, and they tend to utilize extremely compact electric
wiring to achieve a corresponding reduction in weight. For this
reason, the actual current used in automotive electrical wiring is
close to the allowable current capacity, and the time-current
characteristics of fuses must be managed within this narrow range.
(4) Reliability
When a fuse malfunctions during driving, it immediately impairs the
vehicle’s ability to drive. If this occurs while driving on a
highway or in similar circumstances, it can lead to serious
accidents. In today’s world, where vehicles have an average service
life that exceeds over 10 years, fuses are required to deliver
durability in the form of sustained functionality amid various
changes in environment.
(5) Size and Weight
If we look at automobiles in the context of the CO2 emission
regulations specified in the Kyoto Protocol, we learn that the CO2
emissions generated while driving are substantially higher than the
ones generated when producing the parts, materials and vehicle
itself or when disposing of a vehicle. Accordingly, vehicle weight
reduction is an important factor for the automotive sector, and
fuses are also expected to be compact and lightweight while at the
same time guaranteeing performance.
Ordering Information
| Part Number | Ampere (A) | Voltage (VDC) | Body Color |
| AB19U001 | 1A | 32V | Black |
| AB19U002 | 2A | 32V | Gray |
| AB19U003 | 3A | 32V | Violet |
| AB19U004 | 4A | 32V | Pink |
| AB19U005 | 5A | 32V | Tan |
| AB19U075 | 7.5A | 32V | Brown |
| AB19U010 | 10A | 32V | Red |
| AB19U015 | 15A | 32V | Blue |
| AB19U020 | 20A | 32V | Yellow |
| AB19U025 | 25A | 32V | Natural |
| AB19U030 | 30A | 32V | Green |
| AB19U035 | 35A | 32V | Purple |
| AB19U040 | 40A | 32V | Orange |
Installation Guide:
I. Turn Off the ignition switch, and locate your fusebox and
particular fuse to be used.
II. Remove the fuse from the slot you will be using.
III. Insert fuse from existing slot into botton of the fuse tap.
IV. Insert fuse tap into the original fuse slot which provides
power to your new Accessory/Devices.
V. Power your new devides by connceting the open and of the fuse
tap to your new Accessory/Devices.
NOTICE:Please replace the fuse according to the rated current value
indicated on the fuse box cover. Do not use a fuse with a higher
rated current.If the new fuse melted after installed, then the
circuit system need to be tested and should be repaired as soon as
possible.
ATOF_Datasheet.pdf
Quick Details
1) plug-in versions
2) Internationally approved
3) Worldwide availability
Description
Developed by UCHI for the automotive industry, MEDIUM AUTO BLADE
fuse has become the original equipment circuit protection standard
for foreign and domestic automobiles and trucks. Readily
identifiable and easily replaced, this fuse can be specified for a
variety of low voltage electronic applications.
The MINI Fuse is the standard for vehicle circuit protection. Its
miniature design meets the need for more circuits to be protected
while utilizing less space, and its ability to cope withhigh
temperatures in adverse environments makes the MINI Fuse of
recommended choice for protection.
| Specification | ATOF (Tin Plated) | ATO Ag (Silver Plated) |
| Interrupting Rating | 1000A @ 32 VDC | 1000A @ 32 VDC |
| Voltage Rating | 32 VDC | 32 VDC |
| Component Level Temperature Range | -40˚C to +105˚C | -40˚C to +125˚C |
| System Level Temperature Range | -40˚C to +85˚C | -40˚C to +105˚C |
| 105°C and 85°C are typical system level temperature
requirements.Terminals | Sn plated zinc alloy | Ag plated zinc alloy |
| Housing Material | PA66 | PA66 |
| Complies with | SAE J1284,ISO 8820-3 | SAE J1284,ISO 8820-3 |
| UL Listed | File AU1410 | File AU1410 |
| CSA Certified | File No. 29862 | File No. 29862 |
Ordering Information
| Part Number | Package Size |
| 0287xxx.PXCN | 2000 |
| 0287xxx.U | 500 |
| 0287xxx.H | 100 |
| 0287xxx.L | 50 |
Time-Current Characteristics
| % of Rating | Current Rating | Opening Time Min / Max (s) |
| 100 | 35A & 40A | 360,000 s / – |
| 110 | 1A-30A | 360,000 s / – |
| 135 | 1A & 2A 3A-40A | 350 ms / 600 s 0.750 s / 600 s |
| 160 | 1A-40A | 250 ms / 50 s |
| 200 | 1A & 2A 3A-40A | 100 ms / 5.0 s 0.150 s / 5.0 s |
| 350 | 1A & 2A 3A-40A | 20 ms / 500 ms 80 ms / 500 ms |
| 600 | 1A-30A 35A & 40A | – / 100 ms – / 150 ms |
Ratings
| Part Number | Current Rating (A) | Typ. Voltage Drop (mV) | Cold Resistance (mΩ) | I 2 t (A²s) |
| 0287015._ | 15 | 102 | 4.80 | 340 |
