1.Lead edge feeding part for pizza box making machine
(1), suction auxiliary paper feeding, - according to different
bending conditions of the paperboard, the air volume can be
adjusted to ensure smooth paper feeding.
(2), the paper is lifted and the paper is driven by the cylinder,
which is quick and labor-saving.
(3) Adopt the leading edge roller feeding system.
(4), the side baffle and the rear baffle position are electrically
adjusted; the front baffle gap is manually adjusted.
(5) Separate sheet feeding device (Continuous or sheet feeding can
be selected as needed).
(6)paper feed counter, set and display the production quantity.
2.Printer part for pizza box making machine
(1), the outer diameter is φ292mm (including the outer diameter of
the plate is φ300mm).
(2), the surface of the steel pipe is ground and hard chrome
plated.
(3), do balance correction, and run smoothly.
(4) Loading and unloading the printing plate, the electric control
of the foot switch is reversed.
Die cutter part for pizza box making machine
1. The plate roll and pad roller are made of high quality steel,
and the surface is polished and plated with hard chrome. Static and
dynamic balance correction, good running stability.
2. Pneumatically controlled die gap and automatic detachment die
cutter device to protect the rubber pad and prolong the service
life of the rubber pad.
3. The rubber cam is equipped with a mechanical cam type lateral
58mm swimming device to extend the service life of the rubber pad.
4. Phase adjustment device (inner planetary gear structure, large
torque, small transmission gap, same When there are 8-9 tooth
teeth, the load of each gear is extremely light, so the mechanical
wear of the gear is extremely small, and the transmission precision
is maintained for a long time and the service life is prolonged. )
Specialized products.
Auto stacker unit for pizza box making machine
1.the paper taking arm is manual operation. The paper stacking
height can be chosen freely.
2.Adjustment is available for each belt.
3.The paper feeding platform transmitted up and down by chain.
4.the inclination of paper taking platform is changing as the
height of the paper. Brake is installed to fix the platform’s
position.
5.when the paper stacking height reach the set point. the paper
taking platform will hold the paperboard pneumatically.
