0.2 second response time 38mm tube diameter Stoving Varnish or
SS304 high security full height barrier gate
PRODUCT INTRODUCTION
Full height turnstile ---can be compatible with IC card, ID card,
barcode card, fingerprint reading card recognition device used for
staff,
provide civilized, orderly access methods; effectively manage the
access of staff . Can be widely used in some high security places,
such as prison, stadium, parking system area, and so on.
It is extensively use in railway station, banking house, high class
club, office, gym, swimming pooletc..
FEATURES OF SINOMATIC FULL HEGIHT TURNSTILE
1) Automatically low noise mechanism core equipped, highly
cost-performance
2) Sense positioning, reducing mechanical impact make lifetime
longer
3) Operating efficiency, 1~2 seconds open & close
4) Lowest Noise : No matter in operating or outside control, Noise
control under 30db
5) Self-checking and Alarm warning for maintainence
6) Resetting: System cancel authorized pass if passenger delayed
pass
7) Anti-following : prevent illegal passing
8) Anti-clamp :The wings will stopped during in external block, the
wings reset again after default delay
9) The rotary wings will be locked automatically if the system do
not receive IR signal
10) Multi-passage for variety application demands , cover 99% needs
on earth
11) Programmable signal separate control : pass time,pass speed
etc. parameter
12) RS232/RS485 interface meet all kind of communications or
wireless connection
13) Compatible with IC/ID card reader, fingerprint reader, face
recognition devices.
14) Long-distance management through COMPUTER
15) Customize Options: LED display, Voice guide, Warning Lamps,
Indicator Lights guide, Audible &Visible Alarm
PRODUCT PHOTO
PRODUCT PARAMETER
Basic parameters:
| ITEM | SPECIFICATIONS |
| Dimensions | 2300*1370*2300mm |
| Cabinet material | 38 round tube, 1.2mm Mild steel or SS304/316 |
| Channel width | 600mm |
| Ambient temperature | -20 degrees to 60 degrees |
| Working environment | indoor and outdoor (outdoor canopy) |
Technical Parameters:
| Input voltage | 100V~240V |
| Driving voltage | 24V |
| Equipment power | 40W |
| Response time | 0.2S |
| Passing speed | 30 people / min |
| Communication interface | RS485 |
| Communication distance | Less than 1200m |
| Open brake signal input | Dry contact |
| Switching door time | Less than 1S |
PRINCIPLE OF OPERATION
In CLOSE position, the Electromagnetic Locking device prevent the
rotor gear from rotating
This keep the Turnstile in a close position, preventing
unauthorized access.
Upon receiving command signal authorizing access:
• The locking device release the rotor gear
• Pedestrian push the rotor to gain access
• The rotor move by 120°
• The turnstile lock at close position after pedestrian has passed
