Automatic Reciprocating Vertical Elevating Conveyor For Lift
Systems
Vertical Lift Conveyor (freight elevator), designed primarily for
the delivery of goods, usually accompanied by an elevator.The lift
has long and narrow characteristics. Vertical Lift Conveyor with a
motor, which is used to specify the fixed lifting equipment of the
floor.
Vertical Lifting Conveyor Product features:
Vertical lifting conveyors are used to elevating or lower
containers, boxes, trays, packages, sacks, bags, luggage, pallets,
barrels, kegs, and other articles with a solid surface between two
levels, quickly and consistently at high-capacity; on automatically
loading platforms, in Z" or "C" configuration, on a minimum
footprint.
Vertical Lifting Conveyor Technical Parameters:
| Z type, C type, composed type |
| Item | Parcel dimension mm | Specification mm | Chain pitch mm | Inlet height (h1)mm | Loading weight Kg | Max. speed m/min | Max. height (LH)mm |
| L | W | L0 | W0 |
| 1 | ≤1000 | ≤800 | 1700 | 1900 | P=25.4 | 500 | 0-150 | 60 | 25 |
| 2 | >1000-1400 | >800-1200 | 2100 | 2300 |
| 3 | ≤1000 | ≤1000 | 1750 | 2000 | P=38.1 | 500 | 20 | 60 | 30 |
| 4 | >1000-1400 | >800-1200 | 2150 | 2400 |
| Applicable Products: | Bottles, Cans,Big Barrel,Carton Box,Basket,etc |
| Conveying Height: | 1.5m ~ 15m (As Client Fact Need Customize) |
| Conveying Speed: | 1m ~ 25m/min (Adjustable Speed) |
| Conveying Direction: | Up to Down, Down to Up, Both Direction At same time |
| Height of Outlet and Inlet: | Standard Outlet/Inlet Height is 500mm (Can be Customize) |
| Conveyor Width: | 100mm ~500mm (As Client Fact Need to Customize) |
| Conveyor Types: | POM Natural Rubber Conveyor Chains, |
| Conveyor Frame Material: | Spray-paint Carbon Steel+Aluminum Profile Frame |
| Drive Motor: | OMAT, SEW |
| Drive Type: | Gear Motor Drive Mode |
| Speed Regulation Mode: | Variable Frequency Speed Regulation, Step-less Speed Change, etc. |
Vertical Lifting Conveyor Application
1, For use in transporting rectangular and oval trays,boxes and
pallet
2, For use where there are intermediate stations between bottom and
top stations. To serve a number of floors.
3, For manual or automatic loading and unloading.
Features for Vertical Lifting Conveyor:
1, Back switch at the rear of conveyor lining, to stop conveyor if
tray or bus box has not been removed.
2, Lintel switch, to stop conveyor if any object protrudes beyond
the lining of conveyor, on ascending conveyors.
3, Sill switch, to stop conveyor if any object protrudes beyond the
lining of conveyor, on descending conveyors.
4, Automatic override switch at top of the shaft.
5, Bottom switch, to stop conveyor if tray or bus box has not
exited from the shaft, on descending conveyors.
6, Each floor has panel with clearing button, emergency stop
button, and indicator light showing conveyor is in operation.
