2 Way 3/4 ''X3/4'' 90 Degree Threaded Copper Elbow
90 Degree Threaded Copper Elbow Introduction
90 Degree Threaded Copper Elbow is a kind of quick connectors which
are mainly used for connection in air tubing and pneumatic tools,
presing the plastic cap can insert or remove hose, can make the
pneumatic system pipeline connet or disconnect easily without any
tools....
90 Degree Threaded Copper Elbow Characteristic:
1) Made in brass material or carbon steel with nickel plated, and
sealed with NBR
2) Easy to connect tube by one touch, and the is applicable for
Polyurethane tubing and Nylon tubing
3) Different thread type can be offered according to customers'
requirements, e.g.:BSP, NPT,PT and Metric
90 Degree Threaded Copper Elbow Specification:
| Specification | Parameter |
| Name | 2 Way 3/4 ''X3/4'' 90 Degree Threaded Copper Elbow |
| Applicable medium | Compressed Air, Vacuum |
| Pressure range | 0~1.0 MPa |
| Proof pressure | 1.5 MPa |
| Negative range | -100kpa (10Torr) |
| Temperature range | 5°C~60°C |
| Applicable tube | PU hose, Nylon hose, PE hose |
Pictures
Installation
Select the correct size fitting and pipe for the job. Check that
fittings
and pipe are clean, in good condition and are free from damage and
foreign objects.Cut the pipe so that the ends are square.Ensure
that
there are no burrs or damage to the cut end.Once the pipe end is
cut
square and clean,use a permanent marker to mark the insert depth
on the outside of the pipe.This mark is used to ensure that the
joint
is assembled correctly.To assemble correctly,the pipe needs to be
pushed into the fitting untill it meets the tube stop.Follow these
three
steps to insert the pipe into the fitting.
1.lnsert the pipe through the release collar against the grab ring.
2.Push the pipe firmly with a slight twisting action until it
reaches
the tube stop.
3.To ensure that the pipe is correctly inserted, check that the
depth
mark is within 0.005 in (0.13 mm) of the end of the release collar.
Disconnection of the joint can only occur by using the PUSHLOCK
removal tool.By applying pressure to the release collar with the
re-
moval tool, the grab ring teeth are splayed.This action releases
the
pipe, allowing it to be removed from the fitting.
1.Place the PUSHLOCK removal tool around the pipe with the non-
branded face against the release collar.The end with the size dis-
played on the removal tool should be positioned around the pipe and
the other end around the neck of the fitting.
2.Push the removal tool against the release collar and pull the
pipe
with a twisting action to release the pipe.
3.Check the fitting and pipe end for damage.The fitting and pipe
should be free of damage, foreign objects and marks on the outside
diameter. If the pipe is damaged or marked, then cut and use a new
section of pipe.
FAQ
Q: Can l get samples from your factory?
A:Samples available,We usually provide existing sample for free.But
Express Fee is needed.
lf you have UPS/DHL... account,We can use your account.For existing
samples, it takes 1-2 days.
lf you need your own designs, it will takes 7-10 days,Cause we need
make new MOULD.
Q: What is your MoQ? Can l order small amount ?
A:Usually our MOQ is 1,000pcs.To take a good start,We accept any
quantity for your trial order.
Pls feel free to tell us which Item,Size,Quantity, So that we can
make Pl for you,
Wish your business boom and place larger orders in the future.
Q: What is your payment term?
A: Normally,T/T 30% down payment,balance to be paid before
shipment.or L/C.
After cooperate 2-3 times,We will know each other,Will cosider your
ideal payment term then.
Q: What is your delivery time?
A:Generally,15days after receipt of the deposit or L/C lf bulk
quantity,45days.
Q: How about the Packing?
A: Export standard package:Each product to be packed with
Polybag+Lables+Export Carton+Pallet.
We can pack according to your packing design.Extra packing fee is
needed for color packing.
