1'' Pulse Valve Membrane For BFEC DMF-Z-25 DMF-ZM-25 Repair Kit
The below diaphragm is used to repair 1 inch BFEC DMF-Z-25,
DMF-ZM-25 pulse jet valve. The complete 1 set including 1 pc main
diaphragm, 1 pc spring.
The below diaphragm is used to repair 2'' BFEC DMF-Z-50S, DMF-Y-50S
pulse jet valve. The complete 1 set including 1 pc main diaphragm,
1pc secodary diaphragm, 2 pcs springs.
The pulse jet valve diaphragm into before and after two of the gas
chamber, when switching compressed air, compressed air through the
orifice of the gas chamber after entering, and at the time of the
gas chamber pressure after the valve diaphragm components will
close to losing exports, pulse jet valve is in "off" status.
Pulse jet control instrument signal that the pulse jet valve bit
back, after the gas chamber put stomatal open, and the gas chamber
pressure loss after quickly, diaphragm components moved, compressed
air through the valve lose export injection, pulse jet valve in the
"open" status.
Ordering Code No of BFEC Pulse Valve Diaphragm:
| | |
| All Double Diaphragm Pulse Valve | |
| | |
| DMF-Z-25, DMF-ZM-25, DMF-ZF-25, DMF-Y-25, DMF-T-20 | |
| DMF-Z-40S, DMF-Y-40S, DMF-ZF-40S, DMF-ZM-40S, DMF-T-25S | |
| DMF-Z-50S, DMF-Y-50S, DMF-T-50S | |
| | |
| | |
| | |
| | |
| | |
Dimension of 1'' Pulse Valve Diaphragm Repair Kit:
Video of 1'' Pulse Valve Diaphragm Repair Kit:
Brando Production of Pulse Valve Diaphragms:
More BFEC Pulse Valve For You to Choose:
Right Angle Type Quick Mount Type Submerged Type
Solenoid Coil Armature Assembly Pulse Controller
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
