Anvil Cover for Die cutting machine
1.Product description:
1.We have developed the Polyurethane anvil cover to help box makers
maximize their machine time. All the design features we've
engineered into our anvil covers are intended to save time and
money, while producing better quality boxes.
2.We can manufacture PU anvil cover for Corrugated cardboard box
production equipment according to customers' special
requirements.It has the advantages of abrasion resistance,good
hardness,tear resistance,high processing precision,tightened lock
catch.
2. Custom size,hardness and color of Polyurethane Anvil Cover are available
-Material: PU
-Original Place: Taiwan & Shanghai & Italy & USA
-Parameter form
| Item | Roller diameter(mm) | Width(mm) | Thickness(mm) |
| 1 | 265 | 250 | 9 |
| 2 | 268 | 250 | 10 |
| 3 | 281 | 250 | 8 |
| 4 | 296 | 250 | 9 |
| 5 | 332 | 250 | 9 |
| 6 | 341 | 250 | 8 |
| 7 | 378 | 250 | 10 |
| 8 | 381 | 250/408/500 | 10 |
| 9 | 389 | 250/492/500 | 10 |
| 10 | 406 | 250 | 10 |
| 11 | 434 | 250 | 10 |
| 12 | 441 | 250 | 10 |
| 13 | 468 | 250 | 8 |
| 14 | 516.38 | 250 | 8 |
3-Pdoduction introuduce of Die cutting rubber pad
* Adopt imported raw material,longer service life of the cutting
pads.
* Enable bidirectional installation,longer service life of the die
cutting.
* Have complete specification and can be customlized according to
customer's requirements.
* Improve the die cutting precision and indentation.
* Roller ioint more tight.
* Prefession training and technical support.
* Rich inventory,timely delivery.
4.Die cutting rubber pad feature
1. Raw material is imported from Spain with the original pack. The
thickness is thickened. High quality polyurethane material ensures
the anvil cover able to stand strong pressure and shock. Our anvil
cover is with the super abrasion resistance and long time service
time.
2. Our anvil cover is adopted the lock interface. It is easy for
installing, transportation, and disassemble. There is no worry of
deformation of the interface. Simple and high efficiency is our
product feature.
3. Wide range of diameters mold ok from 100-750mm. The width
available from 100-500. Service website is available in South East,
South, Weest, North and Middle of China.
4. Mesh fiberglass and anvil cover connected closely to ensure the
cover not to deform. And also to avoid to hurt the workers. No
screws required. It is time save and also no high requirement for
the width.
5.Die cutting rubber pad Installation steps
1. It can be disassembled from either side of the cylinder; It can
be disassembled in order or contrary to the order of installation;
Must be removed from the upper slot.
2. Exchange steps: two kinds of replacement:
Timely replacement reduce maintenance cost; The service life of
more than 200 million times.
Maintain the flatness of the anvil cover, minimize the formation of
the sponge layer and die-cutting pressure control.
6,Die cutting rubber pad Application diagram
Packing&Delivery
The normal package is wooden box(Size: L*W*H). If export to
European countries,the wooden box will be fumigated.If container is
too higher,we will use pe film for packing or pack it according to
customers special request.
Different products will adopt different packaging methods to ensure
that products can reach customers' ports safely. We can provide
sea, land, air and other modes of transport, respectively from
Shanghai, Tianjin, Qingdao port shipment.
FAQ
1.Q:Are you a manufacture?
A: Yes,we have been in providing the professional products in this
field for 22 years.
2.Q:How to install the machine?
A:we can help with the installation by vedio,email,picture.if it is
a large project,we can arrange our worker help you to install it in
your country.
3.Q:How do you pack the products?
A:Normally as the export standard packaging or as your requirement.
4.Q:What's your available port of shipment?
A:Qingdao port,Shanghai port and so on.
5.Q:Is it customized available?
A:Yes,according to your detailed drawing you provided.
