Single Inlet Energy Saving Materials Drying Stainless Steel Blower
Fan
Introduction Of Centrifugal Fan
The 6-05 medium-pressure series fan can meet the performance
requirements of large flow and high pressure at the same time, and
has the characteristics of high efficiency and low noise. It is a
series centrifugal fan products with a wide range of performance.
The designed max full pressure efficiency is higher than 80% new
series boiler ventilation fans and induced draft fans with the low
noise.
It can be selected if the intake conditions are equivalent and the
performance is suitable.
It can be used to transport normal temperature or high temperature
clean gas, dusty gas, flammable gas, corrosive gas, powder or
granular materials, fiber materials, etc.
The 6-05 medium-pressure series fan can meet the performance
requirements of large flow and high pressure at the same time, and
has the characteristics of high efficiency and low noise. It is a
series centrifugal fan products with a wide range of performance.
The designed max full pressure efficiency is higher than 80% new
series boiler ventilation fans and induced draft fans with the low
noise.
It can be selected if the intake conditions are equivalent and the
performance is suitable.
It can be used to transport normal temperature or high temperature
clean gas, dusty gas, flammable gas, corrosive gas, powder or
granular materials, fiber materials, etc.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 6-05 | 6C | 2000～2880 | 2079～5884 | 1598～4375 | 3～11 |
| 7C | 1680～2880 | 8012～5864 | 3655～6948 | 4～18.5 |
| 8C | 1500～2880 | 2079～10474 | 2842～10371 | 4～37 |
Product Features
Choose the right fan type, reasonable operating condition fan
parameters, preferred flow pattern ,reasonably organize the gas
source, carefully designed leaf type, increase wind tongue
clearance, properly reduce the fan speed, improvement volute
design, design principles for purifying the flow and minimizing
secondary flow losses and so on. Combined with the finite
difference method numerical calculation machine air inlet and
impeller wheel cover type line, and the uniformity of the flow
field at the fan impeller inlet is used as the optimization
criterion to optimize the air inlet. The above method is combined
with the original fan impeller, volute and other optimization
design methods to integrate the optimal design procedure of the
impeller, the volute and the air inlet, the lower specific noise
level and the smaller fan size.
FAQ
1,Q: What’s the MOQ of your company?
A: The MOQ is 1set.
2,Q: How long is the delivery time?
A : A:5-35 days.
3,Q : What’s your payment terms?
A : T/T, L/C, or Negotiable.
4,Q: What’s your warranty?
A: 1 year.
5,Q: Is your company factory or trade company?
A: We have our own factory, our type is factory +trade.
