ZM6161 Split unit air conditioner/cooling heating system station training
unit/inverter
I Introduction
This trainer is designed for the in-depth study of
vapour-compression cycle. It enables to vary the load conditions of
condenser and of evaporator, to use alternative devices for gas
expansion, to handle successfully unexpected operating situations,
such as the block of the refrigerant flow or a wrong gas charge
inside the circuit. Students can become familiar with the
refrigerant pressure-enthalpy diagram and evaluate the heat
balances corresponding to the different cycle components, by using
the set of industrial instruments of the equipment.
R410 environmental refrigerant, refrigeration effect 12000BTH/h
Single phase 220V to 240V, 50Hz
1 units condenser and 1 units remote control
Sight glass on external liquid & gas lines
H&L pressure gauge, manual hand valve
Instrument and control panel, with dig., volt meter, ampere meter,
dig. Wattmeter, on/off control, ELCB,MCB, protec.circuit etc.
Fan coil unit mounted onto board
Condenser unit mounted onto floor or f the framework
The unit is suplied with all material required for installation
Supply with wheels and castors
Supply all necessary spare parts, intallation tools
Floor trap tray
Aluminum( which is better than steel), corrosion resistant outer
casting stand
II Training Program
Plant starting and safety devices intervention checking
Studying the operation of a thermostatic expansion valve
Analyzing the system behaviour versus the variation of:
- Expansion device
- Superheat (when the thermostatic expansion valve is used)
- Air flow rate at condenser and/or evaporator
- Refrigerant charge into the system
Plotting the cycle in the refrigerant pressure-enthalpy diagram
Data acquisition and calculation of:
- Thermostatic valve superheat
- Heat balances corresponding to evaporator, condenser, compressor
- Refrigerant mass flow
- Ideal and actual efficiency
- Volumetric compression efficiency
Supplied with:
English General Refrigeration Manual
English Experimental Handbook
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
