Green SC APC Field Mount Connector Single Mode No Epoxy For FTTB
FTTC
Field Installation SC Fiber Optic Fast Connector no epoxy Single
Mode 2*3mm IL<0.3dB
Yingda fast SC/APC connector to be mounted on a single-mode fiber
end, without time-consuming gluing and polishing. The procedure
does no require "sterile" conditions, because the end face of the
built-in fiber fragment has been glued and polished by the
manufacturer. The low loss at the level of 0.5dB is obtained thanks
to advanced positioning of the inserted fiber end by V-shaped
grooves. The optical gel that is also used in the connector reduces
the effects of an imprecise cut and a possible gap between the end
faces of the fibers.
Due to stepped end style APC ferrule (8 degrees), SC/APC connectors
ensure lower back reflection, it can connected with 2.0*3.0mm cable
or 2.0*1.6mm flat cable, which providing a decent quality without
using expensive tools and maintaining special conditions.
Technical parameter:
| Model | YDFIC-D-SA-L | YDFIC-D-SA-S |
| Dimension | 60mm*9mm | 55mm*9mm |
| Insertion loss | <0.5dB, average≤0.3dB |
| Return loss | ≥50dB |
| Fiber type | Single mode, multimode |
| Fiber diameter | 0.9mm, 2.0mm, 3.0mm, 2.0*3.0mm |
| Working temperature | -40 ~+750C |
| Application | Fiber to the home |
| Dimension | 60mm*9mm | 55mm*9mm |
| Standards | ISO9001 |
Connector Structure:
There are 2 length to choose, difference like below:
Product Features:
Telecom standard mechanical connectors adopt brand new
high-performance PEI material, it has good high temperature
stability, high toughness and strength, good flame retardant
performance, mechanical performance and wear resistance, durable
and stable performance.
Calss A type Tree Circle ceramic ferrule ensure product performance
stability and durability, low insertion loss and small change after
long time, long life span; There is axial clamping force at the
optical fiber joint. When the optical fiber is butted, the gap
between the two optical fiber sections is almost zero, so the
connection loss is less than 0.3dB.
The optical fiber clamp devices are made of high-performance
material PEI, which can effectively prevent the aging of the
original parts, heat and low temperature resistance, and prevent
loose structure inside the device. During the clamping process, the
optical fiber will not move forward, and the anti vibration drop
performance is excellent, which can effectively prevent the
excessive loss of optical fiber connection.
Pack information:
- Inner pack: 10pcs/blister box;
- 100pcs/each inner box, 1000pcs / carton box;
- length fix tool was equipped with the blister box at right, easy
for operation to avoid losing.
How to use the mechanical connector?
How to re-use the fast connector?
Press the green house down to take it off, then can use it again.
Quality assurance:
Four times of grinding and two times of quality inspection
Step 1: 30um grinding
Step 2: 9um grinding
Step 3: 1 um grinding
Step 4: transparent polishing
Step 5: Optical fiber endface detection
Step 6: Insertion loss, return loss detection
Application:
Broadband campus network, Fiber to the home, Broadband limited TV,
Intelligent broadband, Fiber to the building
Standard accessory:
- Fiber length fix tool guide -- 1pc/100pcs/inner box
- user manual -- 1pc/100pcs/inner box
