KPH500 PH/ORP sensor,Compact, flexible and easy to use,black PVC,gray meter host,water quality test.

Production Introduction
The PH/ORP meter is a precision meter used to detect the pH/oxidation-reduction potential of liquids. It is designed with a microcomputer based on the principle of the primary battery and is simple to operate and easy to maintain. Not affected by color, turbidity, colloidal substances, oxidants and reducing agents, it is suitable for the determination of various media such as clean water, wastewater, industrial water, chemical reagents, etc., and is widely used in agriculture, environmental protection and industry.



The sensor uses a composite electrode, which can eliminate the influence of the inconstant "K" value,
A long-term, stable and accurate measurement of PH is realized. The internal structure of the sensor is shown on the right.

Features

1. LCD display, Chinese menu operation, stable performance and strong reliability
2. High-performance operational amplifier, ORP positive and negative poles are symmetrical, small drift, high accuracy
3. Data is not lost after power off
4. Dual 4-20mA transmission output, relay high and low alarm control output, RS485 communication
Output
5. Simultaneous display of PH value, temperature value, output current value, high alarm value, low alarm value

PH/ORP size structure chart

Host size






Sensor size

PH/ORP technical parameters

Q&A
What is pH?What is the principle of measurement?
The pH value of the solution is the negative logarithm of the hydrogen ion activity in the solution, which is expressed as:
PH = - lgαH +
Because the value of hydrogen ion activity in aqueous solution is often very small, it is not convenient for application, so the concept of pH value is used
As a solution acidity, neutral and alkaline indicators.Moreover, the pH value can indicate the strength of the acidity and alkalinity of the solution.
In this way, it is very convenient to apply, and thus:
Neutral solution: [H+]= [OH-] = 1X10^-7
Moles per liter, pH is minus lg[H+] is equal to 7
Acid solution: [H+] > [OH -], [H +] > 10^-7Mol /L, pH < 7, the lower the pH, the more acidic;
Alkaline solution: [H+]<[OH-], [H +] < 10^-7Mol /L, pH >7, the higher the pH, the more basic it is.
Activity is the effective concentration, that is, the portion of the ion that is free to participate in a given reaction - that is, to reach the surface of the electrode sensitive membrane to connect to it
The part of the ion that's touching it.Because of the interaction between ions in a solution, the activity is usually less than the concentration, and this interaction will also be
Blocking the movement of ions reduces the number of ions reaching the electrode membrane.

the measurement of pH electrode is the characteristic of corresponding relation between the output potential of galvanic cell and the pH value of solution.
This correspondence can be epresented by Nernst equation:
E = Eo-2.3 RT/F*pH
E = measure the potential
Eo = standard potential
R = the gas constant
T = absolute temperature (K)
F = Faraday constant
RT/F = 2.3 slope
The Nernst equation is a very important relation in electrochemistry.

When measuring pH, Eo(standard potential) and 2.3RT/F(slope) are obtained by electrode calibration. Then the sample is measured to obtain E (measured potential) and the pH value of the sample is calculated by plugging into the equation.


Why does the same sample give different readings on two pH meters?
PH measurement errors are due to pH electrode, pH meter host, and standard buffer.Due to two pH meter calibration conditions are not the same (e.g., correction made at different times), resulting in slightly different measurements, so use the same buffer at the same time.
Two pH meters were used for calibration, and then the pH value of the sample was determined simultaneously.


What is a composite electrode?
An electrode that combines a pH glass electrode with a reference electrode is called a pH composite electrode.The main advantage of the composite electrode is the combination of two
For one, easy to use.The structure of pH composite electrode mainly consists of electrode bulb, support rod, reference electrode, reference solution, shell and liquid
Junction, electrode cap, electrode wire, joint, etc.

Contact us
Website: www.kacise.com
Phone: +86-17719566736
Email: sales@kacise.com
Location: Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.