High Stability And Bearing Capacity High Tensile Loads In The
Transverse Direction Plastic Geogrid Mesh
Plastic Geogrid Mesh Introduction
Plastic geogrid is mainly manufactured from polypropylene or high
density polyethylene, which are all UV stabilized, chemical and
biological resistance. The plastic geogrid is mainly used in the
construction of roadways, highways, railways, slopes for ground
stabilization and subgrade reinforcement. The plastic geogrid is
extruded into sheet and then punched into regular mesh pattern and
finally stretched. According to the stretched direction, it can be
divided into uniaxial plastic geogrid and biaxial plastic geogrid.
Uniaxial plastic geogrid
Uniaxial plastic geogrid, made of high molecular polymer, is
extruded into sheet and then punched into regular mesh pattern and
finally stretched in the transverse direction. This production can
ensure the structural integrity of the geogrid. The main materials
of the uniaxial plastic geogrid are high density polyethylene and
polypropylene, which are highly oriented and resists elongation
when subjected to heavy loads for long period of time.
Biaxial Plastic Geogrid Specification
| project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
| Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
| Roll width | 3.95 or 5.95 meters |
| Roll Length | 50 meters
|
Plastic Geogrid Mesh Features
1.Resistance to the long term chemical or biological degradation.
2.High stability and bearing capacity to increase service life.
3.High tensile loads in the transverse direction.
4.Prevent the material loss caused by the roadbed distortion and
crack.
5.Lightweight for quick installation and low construction cost.
Plastic Biaxial Geogrid Applications
Plastic biaxial geogrid is the ideal geotechnical material in
situations where stresses are applied in two directions, it is the
ideal geotechnical product used to reinforce the pavement base and
improve the subgrade for any soil stabilization and reinforcement
applications such as municipal roads, highways railway, access
roads, parking lots industrial shipping yards, etc. provides high
strength, high performance, longer life, ensured reliability and
quick installation for base reinforcement of paved roads,
construction haul roads, foundation reinforcement, permanent
unpaved roads, working platforms on weak soils, parking areas, etc
