Locations Subject To Intensive Vehicle Braking Important
Junctions,Bus Stop Asphalt Reinforce Glass Fiber Geogrid
Glass Fiber Geogrid Introduction
Fiberglass geogrid is a kind of new geosynthetics for the
reinforcement of road surface and rodbed.This product is made of
fiberglass filament by woving machine imported abroad.After
coated,it has featurers of alkali-resistance.This geogrid is mainly
used in new road,soft road surface to enlarge the loading capacity
and road maintainence to prevent the road crackle.
Glass Fiber Geogrid Specification
specification
performance | EGA -25-25 | EGA -30-30 | EGA -40-40 | EGA -50-50 | EGA -80-80 | EGA -100-100 | EGA -50-50-Z Self-adhesive |
Tensile Strength (KN/m) | warp | 25 | 30 | 40 | 50 | 80 | 100 | 50 |
| weft | 25 | 30 | 40 | 50 | 80 | 100 | 50 |
| Elongaton% | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| Mesh Size (mm) 25.4X25.4 12.7X12.7 |
| Width(m) | 1-5.95 | 1-5.95 | 1-5.95 | 1-5.95 | 1-5.95 | 1-5.95 | 1-5.95 |
Glass Fiber Geogrid Features:
High tensile strength,elasticity modulus and low elongation;Heat
resistence,no creep deformation,stable physical ad chemical
properties;Crackle-resistence in high or low temature,or in road
reflection;Excellent compatibility with asphalt and concrete of
road surface,either soft or hard land;Compared with the trational
road surface,it reduces the cost,prolong the service life,and avoid
the reflection road crackle.
Glass Fiber Geogrid Application:
1. It is used in road expansion and improvement project and crack
caused by old and new combination position and uneven
sedimentation;
2. It is used in soft soil base reinforcement treatment , is
favorable for soft soil water separation and concretion,restrains
sedimentation effectivly,distributes stress uniformly and improve
overall strength of road base;
3. It is sued for preventing contraction crack caused by new road
semi-rigid base layer,and reinforces and prevents road surface
crack caused by foundation
