Decrease Under Layer Thickness And Save Manufacturing Cost
Polypropylene Biaxial Plastic Geogrid
Biaxial Plastic Geogrid Introduction
PP Biaxial Geogrid is made of virgin Polypropylene(PP) and carbon
black, produced through extruding, punching, heating, longitudinal
stretching, transverse stretching. It has high tensile strength,
excellent interlock capacity and low creep deformation.
Biaxial Plastic Geogrid Specification
| project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Transverse tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
| Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
| Roll width | 3.95 or 5.95 meters |
| Roll Length | 50 meters |
Biaxial Plastic Geogrid Function
1,Improve the bearing capacity of foundation;
2,Preventing cracking and subsiding;
3,Convenient to construct, reducing cost and maintaining expense.
Biaxial Plastic Geogrid Usage
Reinforcement of road beds of various highways, railways and
airports.
2. Reinforcement of permanent bearing road beds of large parking
area and dock goods yard.
3. Slope protections and culvert reinforcement of railway and
highway.
4. Secondary reinforcement of soil slope after unidirectional
tension geotechnical grid reinforcement and further reinforcement
of soil slope sp as to avoid soil erosion.
