there are many important characteristics of a rectifier which makes
them more suitable than a low-voltage generator for electroplating
processes:
Rectifier saves energy; it adopts a high-frequency switching power
supply transformer and as a result, the efficiency at which it
converts current improves.
It is lightweight and also very small; if you have a thyristor
rectifier, the size and weight will be 1/5-1/10. This weight and
size make it very easy for you to expand, plan, install, maintain
and move as the case may be.
Easy modulation; Rectifier output waveform can be modulated. Due to
high frequency, the cost of output waveform adjusting processing is
low and can be easily changed depending on what the users require.
As a result, there will be room to improve the efficiency on site
and also improve the quality of processing product.
Stability of output; the system has a high response speed, and as a
result, the rectifier can adapt strongly to load changes and
electricity network. This characteristic will ensure the accuracy
of more than 1%. Also, the switching power supply works very
efficiently to enable high precision control which will, in turn,
improve the products quality.
1. Reduction of porosity; as the rate at which nuclei forms is
greater than the rate of growth, it leads to nuclei refinement.
2. Improve the binding force; rectifier enable the film to break
down, and as a result, there will be a strong bond between the
coating film and substrate.
3. It enhances the capacity for coverage and dispersion
4. It helps to reduce the stress on the coating; a rectifier help
to reduce internal coating stress and as a result, there will be a
reduction of additive and an achievement of a crack-free coating
film.
5. Rectifier helps a lot if you want to achieve an alloy coating
composition that is stable.
6. With a rectifier, there will not be a need for anode activator
since it improves the dissolution of an anode
