Two Waves Cold Rolled 15kw Highway Guardrail Machine

We are a reputable and reliable manufacturer specializing in Guardrail Installation Machine, Guardrail

Repairing Machine, Guardrail Maintenance Machine and other road safety products for many years.

As a contractor of highway guardrails, we not only supply the Highway Guardrails, but also do the installation

and maintenance of guardrails by our construction team with our Guardrail Machines.

Our Highway Guardrail Installation and Repairing Machines have been exported to Central & South America,

Middle East, East Europe, Southeast Asia, Africa etc.

Our Highway Guardrail Installation and Repairing Machines include YZ Series Pile Drivers, YW Series Pile

Drivers, TDB Series Pile Drivers, YC Series Crawler Pile Drivers, Guardrail Repairing Machines etc.

Introduction

Two waves Cold Rolled highway guardrail roll Forming Machine

This equipment is primarily used in the repair of dented and warped guardrails. Repair is achieved by utilizing 7 rollers (9 rollers is available if you need) for rolling correction, multi-rolling straightening and auxiliary devices to repair damaged guardrails (not including inner strain and tears), to gradually eliminate dents, warping and other types of deformation making guardrails available for recycling and reuse. This guardrail repair straightening product is second generation and is presently the ideal highway maintenance device and the ideal device for use by machinery manufacturers given its stable performance, convenient control and it's bright economic prospects.

Guardrail Repair Process:

This equipment makes use of cold form shaping through a three gantry framed archway and a mold roller of shaft diameter 80mm through a mold produced from high quality steel. The entire guardrail’s mold shape and technical requirements are in compliance with national standards form 31085, Euro-American style crash barrier section size, (note, if entire sections of Japanese style guardrails are needed, only the mold needs to be exchanged, the mold can then correct the entire section). Damaged and deformed guardrails, after undergoing four roll reconstructions, are pushed into the back of the four roll straightening leveling system and the entire section is continuously extruded for the correction of warped deformations and finally passes completely through the system with dents removed and the rail leveled. By shape correction, guardrails may be returned to its original state and technical requirements resulting in satisfactory usage and economic benefits by users

Power and Transmission:

This device makes use of a 15-30KW main drive motor, coupled with JZQ-500 gear transmission to allocate each gear drive to a correction track and by usage of variable transmission speed, gives the system completely reasonable reliability. Also, the device is equipped with 2 meter long front and 4 meter long rear end benches, with a safety protection cover along the transmission gear line.

Usage

This device repairs warps and deformations of the 31085 guardrail (not including inner strain, tears or other serious damages) by passing it firstly through four multi-rollers for straightening to bend and twist different deformations back into their original shape, and performance for re-use. We adopt repair methods based on the classification of the damages. Guardrail repair is divided into two categories: heavy and light warping (visualization). The repairing of heavy warping must be repaired before four-point roll-straightening, the upper and lower rollers mold gap must be increased to 4mm by adjusting the screw of the main machine, (factory standard gap 3mm). The machine can then begin to correct the heavily warped guardrails to return them to their original shape and then they will be corrected along with light warped (the gap must be restored to 3mm) guardrails-one time correction will be complete. If the implementation of repair methods based on the guardrail’s damage classification isn’t carried out, there will be a subsequent increase in equipment wear thus shortening the machine’s operational life.

Main Technical Specifications

Equipment list

1. Front two meters working material platform
2. Guardrail Repair Machine Host
3. 31085 guardrail repair mold one set (already installed)
4 . Behind 3.2 m working feeding platform
5. 15KW speed motor
6. 500 type reducer
7. Electrical control Casing (governor-pack)
8. 45 One of the open-end Wrenches
9. One (1) 12" wrench
10. One (1) Manual
11. One (1) 8mm hex wrench

Equipment Installation

In the installation of the system, the end section must have more than five meter distance between it and workers to ensure safety from the guardrails. After installing the device base (it is fixed by welded steel or concrete footing anchored to the floor by bolts), connect the power supply, add gear oil and after 5 minutes of no abnormal sounds (wires and gear oil should be purchased by buyer), repairs can be carried out.

Cangzhou Best Machinery Co., Ltd set up in 2015, with great power in production and techniques, we are a leading manufacturer of roll forming machines in North of China.We have two workshops more than 4000 square meters, and have own processing machines and design engineer, so that can control machine production time and quality;Our factory is near Beijing or Tianjing, and in Cangzhou there is railway station, so it is convinent transport.Welcome to visit our factory anytime.

Our main products are CUSTOMIZED ROLL FORMING MACHINES, because clients will use roll forming machines instead of bending machine or pressing machines to save labor, and improve production, our regular products are roof sheet roll forming machine, roof tile roll forming machine, CZ roll forming machine, floor decking roll forming machine, highway guardrail roll forming machine, cable tray roll forming machine, stud and track roll forming machine, door roll forming machine, slitting and cut to length, sandwich panel machine and so on.

We have advanced production equipment and our engineering personnel and technicians have extensive experience in designing, developing, and manufacturing machineries. They pay close attention to and keep up with the developing trend of technologies and use new technologies in manufacturing machinery, to keep them competitive. Our products feature high efficiency, high flexibility and low cost.

"Customers are the first, success comes from development" is our principle. We bear this in mind during the whole process from design and development of product to after-sales services. We will design and manufacture machinery strictly in accordance with your requirements.

With good after-sales service network, we can provide support covering the whole process of purchasing, which help you get perfect machinery. We'll solve all the problems you have while using the machines and we'll provide considerate services.

Our machines have been sold to North America, like US, Canada, South America, Nicaragua, Peru, Brazil, Bolivia, Uruaguy, Argentina, Europe, like Greece, Middle east, like Saudi Arab, Dubai, Iran, Iraq, Africa, Egypt, Ghana, Nigeria, Ethiopia, Malawi, Kenya, Tanzania, Zambia, Zimbabwe, South Africa, Australia, New Calidonia, Asia, India, Thailand, Philippines, Indonesia, Papua New Guinea, Bangladesh, Pakistan, Turkmenistan, Malaysia, Vietnam, Mongolia, helping us enter the international market.

Excellent service and high technology assist you to create a bright future.

To make sure machine quality, we applied CE certificate and SGS certificate and so on. 

 

Our roll froming machine exported all over the world and win good repution,clients give good feedback,we have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise. INDIA, AFRICA, SOUTH AMERICA.

WE WILL YOUR BEST SUPPLIER IN CHINA,WELCOME TO CONTACT US.