2L two separators two collection bottles small spray drying
equipment for Experiment portable for laboratory
Product description
The experimental spray dryer (small spray dryer) has a compact
design and can be placed independently
in a laboratory or placed on a specially designed stainless steel
rack. It is self-contained and can be operated
without other facilities. One-button start-up, large color LCD
touch screen operation, two operating modes, fully
automatic or manual monitoring, can be used to facilitate operation
and monitoring of the experimental process.
It is currently a spray dryer with the smallest volume, the least
noise and excellent drying effect.
Applicable scene
This product is suitable for the fields of food, pharmaceuticals,
organic and inorganic chemistry, and the development of fuel cells
for automotive and marine propulsion.
It can make milk powder, egg yolk, soy sauce, coffee, starch,
protein, hormone, serum, antibiotic, enzyme, flavor extract, wax,
dye, detergent, surfactant, pesticide, preservative, synthetic
resin, pigment, ferrite , Ceramics, copying powders, magnetic
materials, metal powders, photosensitive materials, various
industrial medicines,etc.
Machine characteristics
1. Original imported nozzle: high efficiency.
2. Color LCD touch screen parameter display: air inlet temperature
/ air outlet temperature / peristaltic pump speed / air volume /
needle frequency.
3. Fully automatic control: one-button start-up, after setting the
spray process parameters, the temperature reaches the predetermined
temperature, the peristaltic pump starts automatically, the running
animation is displayed on the touch screen, and the running process
is clearly displayed; just press the stop button when shutting
down, the machine is automatically safe Shut down.
4. Manual control: If you need to adjust the process parameters
during the experiment, you can easily switch to the manual state,
and the color touch screen is dynamically displayed throughout the
experiment.
5. Nozzle cleaner (through needle): when the nozzle is blocked, it
will be automatically cleared, and the frequency of the needle can
be adjusted automatically.
6. Shutdown protection function: Just press the stop button when
shutting down, the machine will stop running immediately except for
the fan, to ensure that the equipment will not burn out due to
misoperation (such as forced shutdown of the fan).
7. The spraying, drying and collecting system is made of
transparent high-quality high-borosilicate heat-resistant glass
material, so that the drying process can be carried out in a
pollution-free environment.
8. Built-in imported oil-free air compressor,:the particle diameter
of the powder spray is normally distributed, the fluidity is very
good, the noise is very low, less than 60db.
9. Real-time control PID constant temperature control technology:
make the temperature control in the full temperature zone accurate,
and the heating temperature control accuracy is ±1℃.
10. Air inlet filter: keep the sample pure (for benzene, methanol,
ethanol and other materials, it is safer to choose to add a
nitrogen device)
11. Feed peristaltic pump adjustment: the feed amount can be
adjusted, and the minimum sample volume can reach 50ml.
12. The particle size of the finished dry powder after drying is
relatively uniform, and more than 98% of the dry powder is in the
same particle size range.
13. Nozzle cleaner (through needle): The sticky material will be
automatically cleared when the nozzle is blocked, and the frequency
of the through needle can be adjusted automatically.
14. Innovative tower wall purge device: higher material recovery
rate.
Product paraments
| Water evaporation | 1000mL-2000 mL/h |
| Minimum feed | 50ml |
| Liquid pump | 4 joint rotor pump (feeding tube: imported silicone peristaltic
tube)
(Optional 6-connector rotor pump) |
| Atomization | Refined two-fluid atomizing nozzle (gas-liquid)
(Optional refined plastic two-fluid atomizing nozzle) |
| Nozzle diameter | Following machine standard configuration 1.0mm
(Silicon carbide material can be selected, wear resistance is about
10 times that of stainless steel) |
| Average drying time | 1.0~1.5S |
| Temperature setting range | 30-300°C PID automatic control;(temperature can be set) |
| Temperature adjustment | Inlet temperature +19C |
| Single-phase low-noise fan | Fan flow rate; 95m3/min
Wind pressure; 1.1KPa9
(Optional imported fan from Taiwan, powerful mute function) |
| Temperature Sensor | PT-100 thermocouple |
| Spray adjustment range | 0-0.8 MPa (recommended 0.2 MPa) |
| Spray pressure air intake | 106L/min; displacement; 36L/min;input power 580W |
| Air compressor for spray | Taiwan imported Dolphin brand oil-free air compressor, quiet type |
| Ceramic electric heater | Power 3.5KW |
| Rated voltage | 220V/50HZ |
| Inlet treatment | Fiber cotton filter |
Liquid pump flow
range adjustment | 0-26m/min |
| Electric box cooling | Fan Heat of Brushless DC Motor |
| Air connection caliber for spray | Outer diameter 6mm trachea |
| Function protection | If the fan doesn't start,the heater cannot start,the air compressor
or the peristaltic pump won't start |
| Dimensions | 550(W)X650(D)X1300(H)mm |
| Device control method | Touch screen |
| Machine material/weight | 304/110KG |
Packaging & Shipping
1. Aluminium box and carton box, careful and tight package, make
sure the package is intact
2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China
post/EF-Express/Special line, as you have chose in the order.
