High Temperature Resistance SINOTRUK WG1560161130 Clutch Steel Plate

High Temperature Resistance SINOTRUK WG1560161130 Clutch Steel Plate

Truck Clutch Kit For SINOTRUK Clutch Disc WG1560161130 Clutch Flywheel Disc High temperature resistance

SINOTRUK HOWO A7 heavy truck spare parts clutch disc WG1560161130
Professional Supply Original Clutch Disc for China HOWO Truck Wg1560161130
Truck Parts SINOTRUK Copper clutch disc 420/430 WG1560161130

The role of the clutch

The clutch is located between the engine and the gearbox, and it enables the two to be reliably engaged and completely separated.

(1) The crankshaft of the engine and the transmission system can be smoothly and gently joined to ensure that the motorcycle starts smoothly. Because the motorcycle is in a stationary state before starting, if the high-speed rotating engine is suddenly connected to the load to drive the whole vehicle, it will not only damage the parts, but also cause the engine speed to drop sharply and cause the engine to stall, making the motorcycle unable to start. If the clutch is used to transmit power softly and the driving force is gradually increased from zero, the motorcycle can start smoothly.

(2) The crankshaft of the engine and the transmission system can be separated quickly and completely to ensure that the motorcycle does not produce shocks when shifting gears. When the motorcycle needs to change gears according to the road conditions, if the power is not cut off first, the original meshing gears are not removed due to the load, and it is very laborious to get them out of meshing. Furthermore, when changing gears, one For the gears to be meshed, if the peripheral speeds of the two are not equal, it is difficult to enter the meshing and will inevitably produce tooth end impact, causing gear damage. If the clutch is disconnected to cut off the power of the engine to eliminate the load of the originally meshed gears, the meshed gears can easily disengage. As for the other pair of gears to be meshed, because the engine power is cut off, the rotation speed of the driving gear gradually slows down, and the driven gear also slows down as the vehicle speed decreases, so that the gear can be changed smoothly.

(3) It can prevent the parts of the transmission system from being damaged by overload. When the motorcycle brakes urgently, due to the inertial force, a large torque is often generated in the transmission system. When the inertial torque exceeds the torque that the clutch can transmit, the active part and the driven part of the clutch can produce relative slip. In this way, the parts of the transmission system can be protected from damage due to excessive load. The requirements for the clutch are: the separation must be rapid and thorough, the combination must be soft and smooth, capable of transmitting the maximum torque of the engine, good heat dissipation performance, and labor-saving operation.

Image description: