Automatic Broiler Breeder Female Male Farming Equipment for Parent
Poultry House
Automatic Breeder House:
Female Male Parent Broiler Breeder Feeding Equipment For Automatic
Breeding System House
Pan feeding line:There is a feed sensor at the end of each feeding line which
controls motor on and off to achieve automatic feed delivery.
Installation layout picture of main feed line in chicken house:
Main features of broiler feed pan:
* Outside adjustment feed pan has 6 gears of feed amount,and the
other kinds has 13 gears.
* Feed pan slide switch could adjust feed flow until it is filled.
* Outside adjustment feed pan is more convenient,accurate and quick
to adjust feed flow,the operation is to hand by the out side grids
and rotate up and down.
* Pan bottom can be disassembled on the fround,working for day-old
chickens.
* V-Pan plate design can reduce feed storage on bottom,so birds can
always eat fresh feed .The design can also prevent the birds from
staying too long on the plate.
* The edge of pan plate tilt towards the center,which can avoid
waste of food.
* The smooth edge can prevent the craw of birds from hurting and
make sure safety and comfort feeding.
* Feed pan installation has fixed type or swing type.
Automatic Breeder Farming House Equipment:
| Name | Specification |
| Feed box | 250kgs/150kgs
Galvanized sheet
1.2mm thickness |
| Drive motor | It could be adapted to any house situation.
High chain speed:36m/min
Motor output:1.5kw or 2.2kw depending on chain length |
| 90° Corner | The height of feed trough can be adjusted according to different
raising period |
| Feed channel leg | Height:23cm, width:9.5cm |
| Grille | 1.5m/section
Have 4/5/6 wires to prevent cock
Width between two grills is 42mm |
| Feed channel | Galvanized sheet
High tensile strength
Smooth chain works within feed channel |
Female Breeder Chain Feeding System:
Driving motor:
use cycloidal-pin wheel reduce device, more stable and reliable
convey feed equality, reduce noice than toothed wheel.
Feed trough bracket and connection:
They are liftable. We can adjust their height according different
breeding stages. Bracket surface use hot galvanized
process, anti-corrosion, more suitable for poultry house
environment.
90 degree corner wheel:
The wheel is after special hardening process, alloy bearing don't
need oiling, have good wear resistance and long service
life.
Feed trough:
made of wear-risistant and anti-rust material, have 44mm wide
limited food grill, which can separate the hens and roosters
apart effectively, the limited food grill distance can also be
customized.
Chain:
imported from South Africa, have strong feed delivery speed, can
reach 36m/minute.
Hopper:
We have 260Kg main hopper and 100Kg vice hopper, they are made of
high quality galvanized sheet, there is cover plate
between hopper and trough interface, which is easy to adjust the
height of feed level and to prevent feed spill.
Female Breeder Pan:
| Quantity(Birds/pa n) | 14-16 | - |
| Density(Birds/m2) | 5-6.5 | - |
| Max daily feed intake | 175g | - |
| Product specification | - | - |
| Feed pan | Diameter | 360mm |
| Feed pan | Material | pp |
| Feed pan | Grill spacing width | 40-50mm |
| Feed pipe | Material | Hot galvanized sheet |
| Feed pipe | Distance between two pans | 750mm,800mm,900mm |
| Drive unit | Drive motor | 2.2kw |
| Drive unit | Conveying capacity | more than 2000kg per h |
| Drive unit | Conveying speed | 36m per s |
| Feed hopper | Capacity | 250kgs or 400kgs |
| Feed hopper | Max/1loop/1 drive unit | 110m |
| Feed hopper | Max/l loop/2 drive unit | 110-300m |
Breeders nipple drinking system:
1). Outside shell is made of pure engineering plastic, inner valve
rod is made of stainless steel.
2). Feeding capability: 8-10 birds/drinker.
3). All nipples are anti-rusting, service life over 10 years.
4). Double-sealing structure, with good seal ability, avoid water
leakage and its bad influence to chicken farm.
5). Valve rod is movable in 360 degree, it's suitable for all
breeders to drink, from day-old chicks to adult chickens.
Pressure regulator( double barreled with large flow capacity)
1). Good regulating stability, high switching performance.
2). Sufficient water supply.
3). Recoil cleaning with good cleaning result, save time& water.
4). Good quality movable valve, easy to change
Waterline front system:
Front part is controller of water, it's main function is to adjust
water supply pressure and stabilizing drinking volume.
This part is usually installed in control room.
1). Pressure regulator: make sure to supply stable water to
drinking line. Anti-backlash device can discharge the
impurity in pipe.
2). Filter: clean water and avoid blocking nipples.
3). Water meter: measure water usage volume.
4). Doser: add medicine exactly to prevent disease.
Lifting& suspension system:
Correct height for drinking system is very important for chicken(
both higher and lower can result chicken bone's
distortion, which is bad for chicken growth, also lead to water
waste), it's easy to adjust drinking line height by winch.
Water display level tube:
Use high transparency& impact resistant meterial, it's sturdy and
durable, easy to watch water level, easy to take down
and clean with this advanced design.
Automatic Breeder Nest System:
1. 1520(length)*1285(wideth)*1020 (height)mm size(with prevent
perching line), 24 holes design, one nest hole size 380*250mm.
2. High quality 0.5mm Galvanized plate ,one set weight 47kg, zinc
weight 275g/m2, reach international standards.
3. Use high-quality PVC pedal ,smooth and no thorns,better than
wood.
4.The plastic trays made of modified material, strong and good
toughness. Also can be galvanized sheet.
Advantages:
- PVC don't deform, but the wood will bends after use some time.
- PVC don't have burr, won't hurt chicken feet.
- The wood is easy to produce the bacteria, PVC won't.
- PVC material don't need fumigation, reduce the cost for exporting.
- The using life of PVC is longer than wood.
System Pictures:
Contact:
Jing Yang
Mob/whatsapp/wechat: 0086 18830728667
Email: Jing@xqdmachine.com
Web: www.xqdmachine.com
