Airtight Sealed Welding Black Inflatable Car Garage Tent For Car
Storage
Product Details
Item | Inflatable Car Garage Tent |
Material | 0.4mm pvc and 0.6mm pvc tarpaulin |
Size | Customized |
Color | Customized |
Workmanship | hot welding |
Warranty | 1-2 year |
Accessory | 1,air pump (optional, 800W pump, US$30/PC); 2,Repair kits, 3,packing bag |
Shipping | By air, by sea, by express |
Delivery time | 5-7 days |
Usage | For car Storage/Showcase |
Product Description
This is an ultra-premium vehicle storage shelter, The luxury show
case seals your treasured vehicle away from dings, dust, dirt,
corrosion, mildew, musty odors, and pests, while presenting it in a
show quality display.
Described as a “Touch less Car Cover”, Show Case provides ultimate
protection, yet never touches the vehicle. Show Case is supported
by heavy duty and resilient inflatable air columns, and features a
front panel which zips open and away, allowing the vehicle to
simply be driven in or out.
Product Display
FAQ
Q1: If I put my car in the wet, what will happen?
A: The is an evaporative system. The constant air change will
evaporate all moisture in a matter of hours. This will prevent rust
from the exterior parts while eliminating mold and mildew from the
interior.
Q2: If you are bringing in the air from the outside, you are also
bringing in the moisture from the outside. How does the vehicle
stay dry?
A: The Car Capsule does not eliminate humidity, it eliminates
condensation. The fan exchanges the air by volume 3-4 times an
hour. This constant air change and air flow do not allow hot air
and cold masses to meet. This in turn eliminates condensation and
keeps the vehicle completely dry no matter what the temperature or
humidity level. The does not eliminate humidity, it eliminates
condensation. The fan exchanges the air by volume 3-4 times an
hour. This constant air change and air flow do not allow hot air
and cold masses to meet. This in turn eliminates condensation and
keeps the vehicle completely dry no matter what the temperature or
humidity level.
Q3: How do you get the vehicle in the ?
A: The has 2 zippers that run around the basemat to the back where
the fan is located. Just unzip and roll the upper shroud towards
the fan. Pull the vehicle on to the basemat and roll the upper
shroud over the vehicle. Zip up the unit and plug in the fan. The
takes about 5-10 minutes to inflate.
Q4: What if the power goes out?
A: The cover will deflate and turn into a regular car cover. When the
power returns it will re-inflate in a matter of minutes. There is a
cigarette lighter adapter cord that can be run off of a 12 volt
power supply for prolonged power disruptions or for use at car
shows.
Q5: Do you have a that will fit my pick-up truck?
A:Yes, is made tall enough to fit full size trucks and S.U.V.'s. It
also has an extended version that will fit most older cars like
Packard, Rolls Royce and Cadillac.
Q6: Do I need to use another cover with the ?
A: You do not need to use another cover with the . This will only
block air from circulating in the interior and might trap moisture.
Q7: Can the be used for short-term storage?
A: The can be used for short-term, long-term or anything in between.
It takes about the same time to use as a regular car cover except
for the inflating of the unit. It takes about a couple of minutes
to get the car out.
Q8: Do you have to drain the gas tank or any other fluids before you
put the vehicle away?
A: No, the basement is impervious to gas, diesel, oil or
antifreeze. You do not have to worry about these odors because the
air is constantly changing.
Q9: Do I have to use any dry packs or chemicals to keep the vehicle
dry?
A: No, dry packs or chemicals are not needed. This is an evaporative
system that uses air flow to prevent condensation. This enables you
to take your vehicle in and out anytime you want without having to
mess with chemicals or dry packs.
Q10: How long will the last?
A: If correctly use, it will be last for a long time. The prototypes were built in 1988 and are still in use today.
