NW4005C ABB POWERWARE EXIDE BOARD
⇒ Click here for good price NW4005C
| Brand/Manufacturer | ABB/SWEDEN |
| Part Number | NW4005C |
| Alternate Part Number | NW4005C |
| Description | POWERWARE EXIDE BOARD |
| Dimennsions | 10x14x12.8cm |
| Weight | 1.89kg |
Contact Us
Email: miya@mvme.cn (CLICK)
QQ: 2851195450
Tel: 86-18020776792(CLICK)
Skype:miyazheng520(CLICK)
MOORE NEWS
Metallurgical Industry Capability
Blast furnace ironmaking is the use of iron-containing raw
materials (sinter, pellet or iron ore), fuel (coke, coal powder,
etc.) and other auxiliary materials (limestone, dolomite, manganese
ore, etc.)
The blast furnace is charged into a certain proportion, and hot air
is blown into the blast furnace to help the coke burn, and the raw
materials and fuel are lowered as the smelting process in the
furnace progresses.
In the process of falling material and gas rising, heat transfer,
reduction, melting and decarbonization occur successively to
produce pig iron.
The impurities in the iron ore raw material are combined with the
flux added to the furnace to form a slag, and the molten iron at
the bottom of the furnace is intermittently discharged into the
molten iron tank.
Sent to the steel mill. At the same time, it produces blast furnace
gas and slag two by-products. After blast furnace slag water
quenching, all of them are used as raw materials for cement
production.
Our advantages
①AB(USA AB)Series
②Schneider(Schneider Electric)Series
③General electric(General Electric)Series
④Westinghouse Series
⑤SIEMENS Series
⑥ABB Robots. FANUC Robots,YASKAWA Robots,KUKA Robots,Mitsubishi
Robots,OTC Robots,
Panasonic Robots,MOTOMAN Robots
⑦Westinghouse: OVATION System,WDPF System,MAX1000 system spare part
Conversion,I/O Signal processing,Data communication
systems Digital-to-Analogue
⑧Invensys Foxboro I/A Series system ,FBM(I/O)SCS,Trapezoidal logic
control,Accident recalling,DAC
Invensys Triconex: Redundant fault-tolerant control system,Most
modern fault-tolerant controller based on
Triple Modular Redundancy (TMR) architecture.
⑨Siemens:Siemens MOORE, Siemens Simatic C1,Siemens CNC system.
⑩Bosch Rexroth:Indramat,I/O module,PLC controller, Driver Module
More Products
| BACHMANN | DI232 | BACHMANN | DPM-200 | | BACHMANN | DIO264 | BACHMANN | DIO32-C | | BACHMANN | EM203 | BACHMANN | OT115/R | | BACHMANN | DIO216 | BACHMANN | BS210 | | BACHMANN | DA3284-C | BACHMANN | BS206 | | BACHMANN | CS200/N | BACHMANN | PTAI216 | | BACHMANN | AI0288 | BACHMANN | ACR222/2 | | BACHMANN | AO208/I | BACHMANN | FS221/N | | BACHMANN | DPM200 | BACHMANN | FM221 | | BACHMANN | DO216 | BACHMANN | MPC270 |
|
