SS304L Threaded ASME B16.11 Steel Pipe Fittings

Threaded Tube Threaded Fittings ASME B16.11 Pipe Fittings

We are one of the biggest projects pipeline products supplier in China. Our products contain steel pipe/tube,fittings, flanges. With development more than 20 years, we have accumulated a great many clients all around the world and Yuhong products also won the great praise among the customers.

Threaded Fittings general

Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

The dimensional standards for taper pipe threads are given in ASME B1.20.1. That document gives all required dimensions including number of threads per inch, pitch diameter, and normal engagement lengths for all pipe diameters.

• Threaded piping is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.
• Threaded fittings are normally made of cast gray or malleable iron, cast brass or bronze, or forged alloy and carbon steel.
• They are available in three pressure ratings: Class 2000, 3000 and 6000.

NPT Thread

All fittings on this page are described, are provided with NPT thread, ASME B1.20.1. The American National Pipe Thread Tapered, is the best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal. NPT has a tapered male and female thread which seals with Teflon® tape or jointing compound.

DIMENSIONS OF AMERICAN TAPER PIPE THREAD

ADVANTAGES

• Installation productivity is moderately high, and specialized installation skill requirements are not extensive.
• Leakage integrity is good for low-pressure, low-temperature installations where vibration is not encountered.

DISADVANTAGES

• Rapid temperature changes may lead to leaks due to differential thermal expansion between the pipe and fittings.
• Vibration can result in fatigue failures of screwed pipe joints due to the high stress intensification effects caused by the sharp notches at the base of the threads.
• In hazardous piping systems threaded connections should be avoided, if possible. Their vulnerability to fatigue damage is significant, especially where exposed threads are subject to corrosion.