Push-pull Metal Props for Scaffolding Shoring in Formwork
Construction
Light weight scaffold post shores are used for supporting work in
building slab construction, with working height range from
0,50-0,80 m upto 3,00-5,50 m.
Two end plates, upper and lower plates, help hold and stablize the
post shore in place.
The inner tube is made from pipe Ø 48 mm (thickness from 2 mm to
4.0mm) with holes to adjust the working height with help of the
pin.
The outer tube is made from pipe Ø56 mm (thickness from 1.6 mm to
2.5mm).
The pin diameter is between 12 and 14 mm, with a special design
that does not allow its fall.
The thread is covered by a cup-type nut that has 2 side handles for
easy handling.
A steel ring plate is also equipped on the nut that prevents
concrete materials falling into the nut and get stuck.
Height Range | Outer tube (mm) | Inner tube (mm) | Thickness (mm) | Adjusting device |
| 1.7m-3.0m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.0m-3.6m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.2m-4.0m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 2.5m-4.5m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
| 3.0m-5.5m | 60 / 57 / 48 | 48 / 40 | 1.6-4.0 | Ext. thread / Int. thread |
