Easy Installation Retaining Wall Stone Cag Galvanized PVC Coated
Gabion Box
PVC Coated Gabion Box introduction:
Gabion wire mesh are used for river bank and scour protection,
channel linings for erosion control, and embankment stability. They
are filled with rock at the project site to form flexible,
permeable, monolithic structures to promote rapid growth of natural
vegetation. The base section of the Gabion box is divided into
compartments and filled with stones at the project site. With lids
secured, Gabion box form flexible, permeable, monolithic
structures.
PVC Coated Gabion Box Material:
Low carbon steel wire, galvanized wire, PVC coated wire
PVC Coated Gabion Box Features:
1) corrosion- resistant, rust-resistant.
2) oxidation –resistant, good tensile strength.
3) uniform mesh size, flat and even mesh surface, weave tightly.
4) galvanized /pvc coated for longer life, low costs
5) easy to handle and cut.
PVC Coated Gabion Box Weaving Types:
Straight Twisted,Reversed Twisted
PVC Coated Gabion Box Applications:
1. Great Perviousness, pliability and anti-corrosion.
2. Resist the scour
3. Holistic capability
4. Easy to Construct
5. Economical and environmental protection
PVC Coated Gabion Box Specification:
| Material | Galvanized wire |
Surface treatment
| Hot dipped galvanized (Zinc Coated) |
| Galfan coated: 95% Zinc + 5% Aluminum, 90%Zinc +10% Aluminum |
| Zinc(galvanized) + PVC Coated (Gray or Green) |
| Gabion Basket/Gabion Box/Gabion Mesh/Gabion Cage Specification |
| Wire diameter | 2.0-4.0mm |
| Mesh opening | 80 x 100mm | 90 x 110mm | 100 x 120mm | 60 x 80mm etc. |
| Dimension | 1x0.5x0.5m, 1x1x1m, 2x1x0.5m, 2x1x1m, 3x1x0.5m, 3x2x0.3m,
3x2x0.17m, 3x1x1m, 4x1x0.5m, 4x1x1m, 4x2x0.3m, 5x1x1m, 5x1x0.5m,
6x2x0.3m or as request |
| Material | galvanzied wire |
| Wire diameter | 2.0-4.0mm |
| Mesh Size | 60*80mm, 80*100mm, 80*120mm, 100*120mm, 100*150mm, 120*150mm |
| Surface treatment | hot-dipped galvanzied/PVC coated |
| Color | silver/green/black green |
| Application | soil, bridge construction, water bank |
| Specifications offered |
| Length | Width | Height | Diaphragm | CUM | The tolerance |
| M | M | M | Unit | M3 | |
| 2 | 1 | 0.3 | 1 | 0.6 | |
| 3 | 1 | 0.3 | 2 | 0.9 | |
| 4 | 1 | 0.3 | 3 | 1.2 | length+-3% |
| 2 | 1 | 0.5 | 1 | 1 | width+-5% |
| 3 | 1 | 0.5 | 2 | 1.5 | height+-5% |
| 4 | 1 | 0.5 | 3 | 2 | |
| 1 | 1 | 0.5 | 0 | 1 | Hole size |
| 1.5 | 1 | 1 | 0 | 1.5 | 60x80mm |
| 2 | 1 | 1 | 1 | 2 | 80x100mm |
| 3 | 1 | 1 | 2 | 3 | 100x120mm |
| 4 | 1 | 1 | 3 | 4 |
|
