Low Density 95% ZrO2 Metering Nozzle 3-4 Hours Working Life

Low Density of the zirconia insert for the metering nozzle for 3-4 hours working life used in iran, india already

Products Features:

Our low density of the zirconia insert for the metering nozzle (model no. is FMXC-ZN-PMO1-2) as flow controlling Refractories in the steel liquid and slag flowing lining, widely used in the large capacity of tundish in steel plant. It has the better quality quality, demand not very long working life with 5.0-5.1 g/cm3 bulk density, after embedded in the alumina and carbon or alumina body, can be used in the sliding system of ladle and continuous casting machine , do not desired to heat before using.Usually used for melting the common structuring steel products.

Production Process

Inspection times in production process

1. After Mixing, inspect the water content of material,

2. After pressing, inspect the size,missing angle, etc. of semi-finished products

3. After sintering, inspect the size, missing angle, cave, etc. of finished products

4. Before packing, inspect the size, missing angle, cave,of the finished prodcuts again.

Chemical Composition and Physical Propeties

Size Tolerance:

Middle Hole Diamter:+-0.2mm, other sizes: +-1mm.

Exported Countries

India, Pakistan, Iran, Thailand etc.

Fangming NewM's Goal

Large size, super special shaped super high temp. zirconia ceramics, we will offer the comprehensive and integrated super high temperature, strong crushing resistance, strong erosion resistance application condition solutions.

Zhengzhou Fangming High Temperature Ceramic New Material Co., Ltd. Lies in Xinmi City, Henan, China. It covers over 20000 sm2.

Setup in Sep. 2015, Fangming NewM is one High-New Technology Enterprise, manufacturing the high-purity and ultra-high-temp. new type of composite nano-ceramic materials and products as the zirconia basic material, and the one of the urgently to be solved and breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the one of the rare composite new materials of the super high-temp. structural ceramics, applied in the extreme environments. We has obtained the ISO 9001:2015 quality management, ISO 14001:2015 environmental management and OHSAS 18001:2007 occupational health and safety management system, the energy efficiency management system, etc. series qualifications, and has owned eight patents.

Since setup, our company is devoted to the R&D, creation of the new type of composite nano-ceramic materials and products. Fangming NewM mainly produce: 1). ZrO2 Nozzle, slide plate, ZrO2 Ring, Insert, applied as flow control function in metallurgy at high-temp. State, 2). ZrO2 atomizing nozzle in the amorphous alloy powders, 3).Rare-Earth Oxide Composite SS ceramic thermal field in artificial crystal (Sapphire, laser gem, etc.) grower, 4).Pre-sintered ZrO2 parison, base plate for metal sputtering target, 5). High density ZrO2 ceramic lip brick in ultra thin electronic glass , sintering gasket in electronic device. 6). Device in hot compression equipment of 3D glass, etc. The quality of products we are producing is the same, even better than the one produced by the other producers in the same industry from USA, European countries.

Taking the modernized automatic controlled equipment, persistently carry out the digitized, standardized production and management processes, the advanced ERP and IMES management system in our country, the product’s quality and overall performance has reached even exceeded to the level of the same industry in the world.