Aluminium Oxide (Alumina) is the most widely used ceramic material
with near limitless manufacturing capabilities. They are grouped
together based on purity levels, as the purity of Alumina’s
increases wear and corrosion resistance also increases. LSP
Industrial Ceramics stocks more alumina ceramic tubes than any
other supplier. Our vast, readily-available inventory allows us to
supply our customer’s ceramic tube needs immediately, even for
hard-to-find or specialty products. Alumina’s are used in a variety
of general-purpose applications, and their grade is chosen based on
the application environment. Higher purity Alumina’s can be
formulated for more demanding applications. Typical Applications Include: Wear resistant components, High pressure nozzles, Thermocouple
tubes, Electrical Insulators, Corrosive labware, Furnace fixtures,
Ballistic armor, Thread guides, Laser Tubes, and Pump seals.
Advantages of Alumina Ceramic
● High flatness and parallelism
● Compact and uniform microstructure with high strength
● Good permeability and uniform adsorption affinity
● Dressing easily, Fine pore size.
● Resistant to High temperature to 1000℃.
● High acid or alkaline corrosion.
● High strength
● Voltage resistance
● High Thermal Expansion
● Stable electrical performance characteristics.
● Good thermal conductivity
● Excellent Thermal Insulation; low thermal conductivity
● High resistance to crack propagation, high fracture toughness
● Ability to conduct oxygen ions
Application of Alumina Ceramic
● Pump components, valve components, flow components
● Vacuum Chucks
● Filters
● Oxygen Diffusers
● Air Bearings
● Permeable Substrates
● Dispersion Media
● Ash Handling
● Wicking Media
● Fluidized Bed Plates
● Specialty Spargers
● Breathers – Vents
| Alumina Ceramic Properties | 96% Alumina Ceramic | 99% Alumina Ceramic |
| Item | Unit | Typical Values |
| Physical Properties |
| Color | | White | Ivory |
| Density | g/cm3 | 3.7 | 3.85 |
| Alumina Content | % | 96% | 99% |
| Gas permeability | | 0 | 0 |
| Water Absorption | | 0 | 0 |
| Mechanical Properties |
| MONS' Hardness | Grade | 9 | 9 |
| Rockwell Hardness | HRA | 80 | 82 |
| Vickers Hardness (Hv50) | Gpa(Kg/mm²) | 15.7(1600) | 15.7(1600) |
| Flexural Strength(20°C) | Mpa | 300 | 330 |
| Compressive Strength(20°C) | Mpa | 2000 | 2000 |
| Modulus of Elasticity | Gpa | 275 | |
| Poisson's Ratio (20°C) | | 0.22-0.23 | |
| Fracture Toughness(20°C) | MPam1/2 | 3.5 | 4 |
| Thermal Properties |
| Thermal Conductivity(20°C- | W(m.K) | 25 | 27.5 |
| Thermal Expansion | 10-6/°C | 6.5-7.5 | 7.6 |
| Maximum Use Temperature | °C | 1600 | 1650 |
| Electronic Properties |
| Dielectric | KV/mm | >12 | >10 |
| Dielectric Constant | Er | 9-10 | 9.1 |
| Dielectric Loss Angle(1MHz) | | 0.0002 | 0.0002-0.0003 |
The use of ceramics is as old as the human race. Traditionally,
they were molded and shaped into pottery and cast as bricks. The
sturdiness and endurance of ceramic materials made them ideal for
use in any climate or weather conditions. Modern advanced ceramics
have been altered and engineered under exacting laboratory
conditions to produce a wide variety of industrial products. The
most prevalent of those products is Alumina Ceramics.
Do not find similar ceramic products on this page?
For more detail of ceramic products like price,shipping,samples...
Quick Free Quote . Our official E-mail: admin@cerampart.com(Mr admin).thanks
