Pressure Transmitter
Features
Stainless steel housing
can be use in industry application
Cost-effective
Featuring small size, stable performance and mass production
Introduction
SPT21C1 is economical pressure transmitter, uses standard ceramic
pressure sensor and special circuit board to make it good
performance. This product is used for industrial,water treatment
and hydraulic pressure test.
Specification
| Pressure range | 0～0.5…40MPa (0~5…400bar) |
| Over pressure | 2 times FS |
| Pressure type | Gauge |
| Process connection | G1/4 male thread (or as per customer’s requirement) |
| Accuracy | ±0.5％FS |
| Long term stability | max. ±0.3%FS/year |
| Offset thermal drift | ±0.02%FS/℃ |
| Application temp. | -30~80℃ |
| Storage temp. | -40~125℃ |
| Power supply | 12~28VDC |
| Output signal | 4~20mADC(2 wires) 0/1~5VDC(3 wires) |
| Load resistance | ≤(U-12)/0.02Ω(2-wire), ≥10k(3-wire) |
| Housing protection | IP65 |
| Electrical connection | DIN43650 plug,M12 (or as per customer’s requirement) |
Construction and Outline Dimension
Construction material:
• Housing: SS
• Pressure port: SS
• Sensor: Ceramic
• Sealing gasket: Viton
• Plug housing: Plastic
• Cable: Polyethylene
Outline dimension:
FAQ
1.Q: How long is the delivery?
-- Mostly within 7~10days.
2.Q:Can I get a sample?
-- Sure, contact us please.
3.Q:What is your MOQ?
-- 1pcs.
4.Q: How about warranty time?
-- 1 year.
6.Q:How do you control your quality ?
-- We control from parts, process, testing, packing ,retesting.
Each Sensor will be tested two times before reach you, after that
sport test for the third time. Make sure about the quantity.
