1060 Aluminio 5mm 10mm Aluminum Alloy Sheet For Insulation, Food
Industry, Decoration, Lamp, Traffic Signs
Product Introduction
It has high plasticity, corrosion resistance, electrical
conductivity and thermal conductivity.
1060 aluminum content of more than 99.6% is also called pure
aluminum, which belongs to a commonly used series in the aluminum
plate family.
Advantages of this series of aluminum plates: the most commonly
used series, the production process is relatively simple, the
technology is relatively mature, and the price has a huge advantage
over other high-grade alloy aluminum plates.
With good elongation and tensile strength, it can fully meet the
conventional processing requirements (stamping, stretching) and
high formability.
For industrial pure aluminum, it has high plasticity, corrosion
resistance, electrical conductivity and thermal conductivity, but
its strength is low, and heat treatment cannot strengthen the
machinability. It can be gas welding, hydrogen atom welding and
contact welding, and it is not easy to braze; it is easy to
withstand Kind of pressure processing and extension, bending.
Typical use
1060 is widely used in products that do not require high strength.
Products are commonly used in signboards, billboards, building
exterior decoration, bus body, high-rise and factory wall
decoration, kitchen sinks, lamp holders, fan blades, electronic
parts, chemical instruments, sheet metal processing parts, deep
drawing or spinning concave Shaped utensils, welding parts, heat
exchangers, clock surfaces and plates, nameplates, kitchen
utensils, decorations, reflective appliances, etc.
Chemical composition
| Alloy, temper | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | other | AL |
| New alloy | Old alloy | 0.25
| 0.35
| 0.05
| 0.03
| 0.03
| ——
| 0.05
| 0.03
| ——
| Single | Total |
| 1060 | L2 | 0.03 | —— | 99.60 |
Mechanical property
| Alloy and Temper | Tensile strength
Rm/Mpa | Yield strength
Rp0.2/Mpa | Elongation /% | Hardness / HBWα |
|
| 1060-H24 | 105-145 | 75 | 3 | 33 |
Physical property
| Alloy and temper | Thermal expansivity
(20-100℃)
μm/m·k | Melting range
(℃) | Conductivity
20℃(68℉)
(%IACS) | Electrical resistivity 20℃(68℉)
Ωmm2/m | Density (20℃)(g/cm3) |
|
| 1060-H24 | 23.6 | 646-657 | 61 | 0.0283 | 2.71 |
Quality characteristics
Density: 2.710g/cm³.
Poisson's ratio: 0.33 at 20°C (68F).
Modulus of Elasticity: Stretch: 69GPa (10×106psi)
Category: pure aluminum (AL above 99.6%)
Aluminum plate varieties: bright aluminum plate, brushed aluminum
plate, pattern aluminum plate, film aluminum plate...
Supply status: H24, H14, H12, H26, H18, O...
Thickness: 0.2mm-50mm
Width: 1000/1220/1250/1500/2000mm
Length: 2000/2440/2500/3000/6000mm
