16L Automatic FM200 Hanging Fire Suppression System
Description:
Hanging type FM-200 fire extinguisher
A hanging type FM-200 fire extinguisher is a type of fire
suppression system that uses FM-200 clean agent to extinguish
fires. The fire extinguisher is installed in an area or room to
provide fire protection using a specialized hanging bracket or
sling that suspends the extinguisher from the roof or ceiling.
The hanging type FM-200 fire extinguisher is an effective fire
suppression solution for areas with sensitive equipment or assets
where a clean agent is necessary to avoid damage from water or
foam. The system works by releasing the FM-200 agent into the
protected space when a fire is detected, which extinguishes the
fire by removing the heat and oxygen needed for combustion.
The FM-200 agent is stored in a cylinder and is discharged through
a network of piping and nozzles. The system can be activated
manually or automatically through a fire detection system. The
hanging type FM-200 fire extinguisher is also an ideal fire
suppression solution for spaces that are difficult to access or
where floor space is limited.
This type of fire extinguisher is commonly used in data centers,
computer rooms, switchgear rooms, and other areas where electrical
equipment is present and a clean agent is necessary for fire
protection.
- Preset and independent
- It is easily wall or ceiling mounted in the protected area to
directly put out the fire, without pipe network distribution.
- It has two activation methods: automatically send the signal to
control panel for releasing the agent by electricity and manual
control mode.
Parameters
| No | Specifications | Parameters |
| 1 | Tank size | 16Ltr, 20Ltr, 30Ltr |
| 2 | Device model | XQQC16/1.6, XQQC20/1.6, XQQC30/1.6 |
| 3 | Storage pressure | 1.6mpa |
| 4 | Maximum working pressure | 2.5mpa |
| 5 | Discharge time | ≤8s |
| 6 | Maximum filling rate | 1kg/L |
| 7 | Device starting power | DC24V/1.6A |
| 8 | Environment temperature of protection zone | 0℃～50℃ |
Below data refers to regular temperature at 20 centigrade and
atmospheric pressure at 1 bar. The max coverage would vary a little
from the ambient temperature and pressure on the real condition.
| Device model | Filling amount (kg) | Maximum working pressure(Mpa) | Storage pressure (Mpa) | Maximum coverage
(m³) | Starting mode |
| XQQC16/1.6 | 16 | 2.5 | 1.6 | 22.22 | Solenoid actuator
Starting power:
DC24V/1.6A |
| XQQC20/1.6 | 20 | 2.5 | 1.6 | 27.78 |
| XQQC30/1.6 | 30 | 2.5 | 1.6 | 41.67 |
Compositions:
Hanging type fm200 fire suppression device can be divided into two
types: one is the electromagnetic type, the other is the
temperature-controlled type.
The electromagnetic type hanging fm200 fire suppression device
consists of a fm200 cylinder, a container valve, a solenoid
actuator, a pressure switch, a stainless steel pipe, and a nozzle.
The temperature-controlled type hanging fm200 fire suppression
system prefers a unit of temperature sensor instead of container
valve and solenoid valve.
Applications:
Electronic computer room, a data processing center,
telecommunications facilities, process control, expensive medical
equipment, industrial equipment, library, museum and art gallery,
clean room, anechoic chamber, emergency power facilities, flammable
liquid storage area, etc.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine, oil switch, oil immersed transformer, melt
impregnating tank, tank, large generators, drying equipment, cement
pro duction process of pulverized coal, and the ship's engine room,
cargo hold, etc.
Competitive Advantage:
1. Small but effective
2. Extremely simple installation
3. Little space for placement of it
4. Hanging on the ceiling or wall
5. Low cost for little protective zone
6. Colorless, odorless and pure
7. 0% opportunity of hurting the ozone layer
8. Do no harm to the environment
9. Good substitute to the halon series
Company Introduction:
Guangzhou Xingjin Fire Equipment Co., Ltd. is situated in
Guangzhou, which is vital to connection between China and the rest
of the globe. It is surrounded by excellent transportation and a
lovely environment. We are a manufacturer, and our professional and
experienced staff, which consists of the program design team, the
skillful installation team, the quality detecting team, and the
after-sell service team, is dedicated to the study and development
of HFC-227ea (FM200) products. The FM200 fire suppression system,
the cabinet type FM200 fire suppression system, the automated FM200
fire extinguisher (ceiling mounted style), the fire detecting tube
suppression system, and the automatic fire suppression tube are all
currently commonly utilized. As a result of high-quality products
and services as well as the good reputation, our company is
well-received by the customers in China.
FAQ:
1. Are you a tradding company nor a manufacturer?
We are manufacturer.
2. How long will you use for a usual quantity order?
For usual order(40 pics), we often spend 15 working days in
makeing; for some big orders, it is better to communicate with our
saler.
3. In what way do you want the payment paid?
We accept all kind of payment way, but we will more grateful if you
use simple ways like T/T or Paypal.
