Power Surge Voltage Protector 40ka Lightning Surge Arrester China
Suppliers
Power Surge Voltage Protector 40ka Lightning Surge Arrester
Description:
• Britec new SPD’s provides solutions suitable for all types of
installations and all risk levels.
• Extremely low voltage protection level
• For protection against transient overvoltage to be effective, the
position of the SPD in the installation and the type of SPD must be
appropriate for the level of risk.
• Green window will change to red when fault occurs
• Britec’s range of type 2 (T2) SPDs meets all the requirements of
low voltage installations.
• Also provide remote alarm terminal
Power Surge Voltage Protector 40ka Lightning Surge Arrester Product
Details:
| BR150 40 4P | BR275 40 4P | BR320 40 4P | BR385 40 4P | BR440 40 4P |
| SPD classification according to EN61643-11 | Type 2 | Type 2 | Type 2 | Type 2 | Type 2 |
| SPD classification according to IEC61643-11 | Class II | Class II | Class II | Class II | Class II |
| Max. continuous operating a.c. voltage Uc | 150V | 275V | 320V | 385V | 440V |
| Nominal discharge current (8/20us) In | 20kA | 20kA | 20kA | 20kA | 20kA |
| Max. discharge current(8/20μs) Imax | 40kA | 40kA | 40kA | 40kA | 40kA |
| Voltage protection level Up | ≤0.8kV | ≤1.3kV | ≤1.5kV | ≤1.8kV | ≤2.0kV |
| Voltage protection level 5kA Up | ≤0.6kV | ≤1kV | ≤1.2kV | ≤1.4kV | ≤1.6kV |
| Max. backup fuse | 125A gG | 125A gG | 125A gG | 125A gG | 125A gG |
| Response time tA | ≤25ns | ≤25ns | ≤25ns | ≤25ns | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state / fault indication | green / red | green / red | green / red | green / red | green / red |
| Cross-section area (Min.) | 4mm2 | 4mm2 | 4mm2 | 4mm2 | 4mm2 |
| Cross-section area (Max.) | 35mm2 | 35mm2 | 35mm2 | 35mm2 | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermal plastic UL94-V0 |
| Degree of protection | IP20 | IP20 | IP20 | IP20 | IP20 |
| Order Code | B18401 | B18403 | B18405 | B18407 | B18409 |
| Order Code (With remote signaling) | B18402 | B18404 | B18406 | B18408 | B18410 |
Technology characteristic:
Power Surge Voltage Protector 40ka Lightning Surge Arrester
Feature:
• T2 Type.
• 8/20μs
• Removable plug-in module.
• 4-poles lightning current arrester
• 40kA protection
• For using high-performance MOV and maximum
Power Surge Voltage Protector 40ka Lightning Surge Arrester
Applicable range:
The Class C series of over-voltage surge protective devices has
been developed to protect against the effects of indirect lightning
discharges and induced voltages and is intended to provide
protection in zones 1 2 per IEC 62305.
Our Services:
• 21 years global leading profession manufacture of electrical
products surge arrester
• All products will be well packed before shipping
• Standard packaging, and you can also tell us your own
requirements on packaging
• Faster delivery
• Individually Tested Prior to Shipment
Installation:
• The type 2 arresters must install into sub-distribution boards
after main distribution boards containing type 1 arresters.
• For proper operation between type 1 and type 2 arresters at least
10- 15 m cable or wire must be otherwise a decoupling coil have to
install between the two devices.
• In areas where storms are frequent, it is strongly recommended to
install additional protection systems.
Certificate:
Company profile:
Wenzhou Britec Electric Co., Ltd. founded in 2003, has been
committed to the field of lightning protection, the company is
located in Yueqing, Zhejiang. The company is committed to the
development and application of lightning protection. The company
has gathered a group of experienced industry elites and marketing
management personnel. They have accumulated more than ten years of
industry experience, mastered exquisite product development
technology and practical application experience, and can provide
targeted scientific industry solutions.
Production flow:
Laboratory equipment:
Shipping:
FAQ:
1 How long is your products warranty ?
A: The warranty period of our products is 5 years.
2 How about inspection?
A: We have the whole inspection system from raw material to end
products.
3 What do you have for certificate?
A: Our products are passed through CE, TUV, CB standarded.
4 What is payment terms?
A: T.T, Paypal and L/C is acceptable.
5 What is the service offered by company?
A: We have the professional enginer team which can design and
develop the mold to arrive different customer nequirement. We also
have the sales team to offer good service from pre-sale to
after-sale.
6 How to become the agents for Britec?
A: It is OK! We will depend on the sales turn over and also do
research on your market. If your have interest,let us discuss more
!
