Automatic Carton Box Paper Card board Partition Slotter Machine
1.Partition slotter machine detailed technical parameters
1.Partition slotter Machine shape (long*width*height) 1500*1350(1550,1750,1950 )*1220
2. Partition slotter machine Pushing cardboard speed of working table 120 times/min
3. Partition slotter machine Min. span size of slot 45mm
4. Partition slotter machine Max. depth of slot 150mm 200MM
5. Partition slotter machine Max. size of processing cardboard
(400x1400mm)
6. Partition slotter machineThickness of processing cardboard 3mm-5mm
7. Partition slotter machine Min. size of processing cardboard 80mmx100mm
8. Partition slotter machine Width of slot 3.5mm or 5mm
2.Partition slotter machine function
When packaging products in carton boxes, multiple products are
usually placed in a carton. In order to avoid collisions between
products, cardboard partitions are placed between products when
placing products.
Partition slotter machine has 6 working shafts. The first pair of
shafts transports cardboard. The eccentric right handle of the
shaft can be adjusted according to the thickness of the board. The
second pair of shafts is the grooving spindle. The right handle can
be eccentrically adjusted according to the thickness of the
cardboard to cut the cardboard groove. The third pair of shafts
transports the processed cardboard out of the machine, and a
pressure plate presses the cardboard to prevent the cardboard from
being picked up by the wheel cutter. There are six more razor
knives to clean out the cut paper scraps at any time to prevent the
pressure and gambling from affecting production.
3.partition slotter machine all standard size we can do is
1200*300mm,1400*300mm,1000*400mm,1200*400,1400*400,1200*600,1400*600
Partition slotter machine parameters as follows : (take 1000*300mm
for example)
| Partiiton slotter machine Model | 1000 |
| partiiton slotter Machine max speed |
120 pieces/min |
| partiiton slotter Max feeding size (L×W) | 1000mm×300mm |
| Partiiton slotter Min feeding size (L×W) | 100mm×75mm |
| partition slotter Min slotting distance | 45 mm |
| partiiton slotter Slotting number | 9 groups of slotting knives |
| partiiton slotter Slotting width | 3.5mm 5mm 7mm (Choose one according to the thickness of paperboard) |
| Dimension (Length*Width*Height) | 1500mm×1450mm×1300mm |
4.Partition slotter Operation and maintenance
Before connecting to the power supply, check whether the electrical
system is intact and whether the motor is damp and leaking. Connect
the power supply to allow the motor to run idling, and check
whether the motor is running in the correct direction.
partition slotter machine Cardboard vertical board: According to
the size of the processed cardboard, you can loosen the horizontal
and vertical handles to align the size, and put the cardboard in
flat to prevent it from being bent. Then start production.
partition slotter machine adopts bearings for rotation, which
should be overhauled and cleaned every six months to a year, and
filled with 2-3 calcium base grease. For other sliding parts, add
20-30# engine oil once per shift.
Before starting the partition slotter machine, check whether all
parts are in good condition and whether the fasteners are loose.
Always keep the surface of the worktable clean to prevent
impurities from being brought into the slideway.
