0.1-500KGH/H Chicken Feed Pellet Making Machine With Flat Die
Introduction for Chicken Feed Pellet Making Machine:
This flat die chicken feed pellet making machine is mainly used for
producing feeds for chicken, cow, sheep, rabbit, chick, duck, pig,
shrimp and making other industrial pellets. It is widely used for
industry, plastic pellet, organic fertilizer and wood pellet.
Pellet size is available from 2mm to 8mm.
Pellets are formed through pressing, which can kill some common
pathogenic microorganisms and parasites to prevent some diseases.
As the moisture of pellet is low, it is easy for storage and can
keep its original shape in water, which increase the utilization
rate of feed greatly.
Main Parameters of Flat Die Chicken Feed Pellet Making Machine:
| Model | Capacity (kg/h) | Power(kw) | Packing Size(mm) | Weight(kg) |
| YHPM-120 | 60-100 | 2.2/3 | 750*350*650 | 60 |
| YHPM-150 | 90-120 | 4 | 750*350*650 | 180 |
| YHPM-200 | 200-300 | 7.5 | 1000*430*950 | 250 |
| YHPM-230 | 300-400 | 11 | 1140*470*970 | 270 |
| YHPM-260 | 400-600 | 15 | 1120*520*1070 | 300 |
| YHPM-300 | 600-800 | 15/18.5 | 1270*520*1070 | 310 |
| YHPM-360 | 700-900 | 22 | 1340*580*1060 | 400 |
Main Features of Flat Die Chicken Feed Pellet Making Machine:
1. Simple structure, wide application range, small floor area and
low noise.
2. Powder feeding, no need of adding water. The final feed pellets
moisture is low and easy for storage.
3. The results showed that the pellet feed can improve the
digestion and absorption of nutrients, and the pathogenic
microorganisms and parasites can be killed during pelletizing. The
feed pellet is suitable for raising rabbits, fish, ducks and
experimental animals.
4. The die of chicken feed pellet making machine has die hole form
1.5 ~ 20 diameters, which is suitable for granulation of different
materials and obtains the best results.
5. Suitable for all kinds of materials.
FAQ:
1. Why there is no pellet output during pelleting?
A: There are usually 2 cases causing this problem:
1). Die holes are corrosion and has poor finish.
2). Large gap between roller and die plate.
The ways to solve this problem are:
1). Clean the remaining pellet in the die hole. 2). Use oil
containing material to make pellets for polishing the die hole.
2. Why the Pellets discharged have much powder or no pellets discharged?
A: There are usually 3 cases for causing this problem:
1). Moisture of material is too low.
2). Moisture of material is too high.
3). Too much crude fiber in raw material.
The ways to solve this problem are:
1). Increase water content.
2). Reduce water content.
3). Add more sticky powder.
3. Why the capacity becomes more and more lower?
A: There are usually 2 cases for causing this problem:
1). Large gap between roller and die plate.
2). Moisture of material is too low.
The way to solve this problem:
1). Adjust the gap between roller and die plate. 2). Increase the
water content of material.
4. Why are the pellets too hard and bright?
A: Moisture of material is a little low will cause this problem, add
more water for the powder material.
5. Why the pellets edge is soft and have rough surface?
A: There are 2 cases for causing this problem:
1). Moisture of material is not suitable. 2). New die for using.
The way to solve this problem:
1). Reduce or increase the moisture of material. 2). Polish the die
by using oil containing material.
Structure and Final Feed Pellets of Chicken Feed Pellet Making
Machine:
Other Related Machinery of Flat Die Chicken Feed Pellet Making
Machine:
